Interested in 2305 or 2520

[archerynut]

I did run accross this spreadsheet before, and tried to hunt down a Massey dealer to check out their machine. Unfortunately I was not very happy with the dealer at all, and decided not to pursue it. Too bad, because is looked like a great machine. Is that what you ended up buying? What were the reasons?

I did end up buying the MF and it is a great machine. There are quite a few reasons that I ended up with the MF. The most important to me was being comfortable with the dealer and price (value). In my area I think I got the best value out of the MF, although I did have to travel out of state to find that value.

I also have to say that I was dead set on going green when I started shopping for a tractor. After a couple of months I ended up with a red tractor and I really like it. I would be just as happy with a green one or orange one, there are all good tractors. I ended up doing tons of research and asked a ton of questions here at TBN and this site really answered a lot of questions that this newbie had.

 

[Phunge]

I just received our 2520 with 200cx a couple of hours ago. When we were trying to decide on a unit the choice then was a B7800 with FEL or the 2520. What won me over to the 2520 was the way better quick release of the loader on the 2520 and that is has two hydraulic pumps. The deere also has rear hyd port option that kubota doesn't have on the 7800. The price difference between the two here in BC and Alberta was less than a thousand bucks.

Congrats, vintagemilano!

 

[Phunge]

Well it looks like I closed the deal, I ended up going with a

2520

CX200 loader with 61” bucket

62D cutter with independent lift kit

46 Backhoe with 16” wide bucket

Bradco Pallet Forks – Does anyone have any experience with these? If so are they good?

This was a hard thing to do, considering I was looking at a $2500 Home Depot JD special, I blew the budget 10x over

The hard part was the loot, this thing cost as much as a car. I hope I don't regret it. I plan to really do some work over the next few years here on the new 2 acre property. I also have plans for allot of underground pipe to run the water away from the shop and house.

This brings me to another question, for a guy that has never really played on one of these machines; will I be able to pick it up pretty easy? Or will it take allot of practice?

vintagemilano I noticed you are in Canada what did you end up paying if you don't mind me asking?

In closing thanks everyone for all the great input, I am sure allot of you advance tractor owners get tired of all the fresh meat on here asking millions of questions.

Thanks again for everything. Some of you guys should be getting paid by John Deere. I feel the help you guys offer help sell a few units for John Deere.

Once again thanks for all the great help.

Congrats, JDCAN!

It's funny, I also started out looking at the Home Depot Riding Mowers, and am now at 10x my orignal budget. These things do cost as much as a car, but my arguement to the wife is that this tractor should last me 20-30 years, not 5-10.

 

[ducati996]

I see what you're saying about the specifications. I can't believe they wouldn't check more carefully before publishing these specs.

The more I look at deeres spec's the more pissed I get - because they should take the time to tighten things up and make the effort of checking what they post. The spec's are posted on Deeres site, under the 2000 series and then it gets to the 200cx loader. Look at the specs and see how screwed up they are. They have the 4110 & 2305 having more GPM flow than the 2520 (the 4110 is a very capable machine and almost has the exact implement flow and PSI as the 2520). The 2305 lifting almost as much as the 4110 when the 4110 has more flow and higher pressure, same loader (how the heck does that happen?), the 2305 having high lift ability of the 2210, but yet they have the same flow, loader and PSI. The 2320 having higher lift, break out force, rollback numbers than the 2520, when that cant be true or even possible- same loaders on both machines

200CX specs below:
Select Product

Errors are all over the place and its time Deere makes an effort instead of the sloppy crap they post. Just by being lazy the amount of sales lost because folks go the the competition based on the pathetic specs they post.

 

[JDCAN]

Congrats, JDCAN!

It's funny, I also started out looking at the Home Depot Riding Mowers, and am now at 10x my orignal budget. These things do cost as much as a car, but my arguement to the wife is that this tractor should last me 20-30 years, not 5-10.

Phunge I am glad I am not the only one that blew the budget

I can't wait to get the new toy er machine

Now comes the hard part waiting 10 to 14 days. The dealer has everything in stock but the back hoe, I guess that can take 10 days.

I guess while I wait I will check out the site as much as I can to help me during the wait.

Thanks again everyone for all the great feedback. Thanks again for helping, even tho my questions have been asked a million times.

 

[RollTideRam]

The specs are bad, and they don't even have a rotary cutter listed for the 2520. I could almost swear they had the lx5 listed before I bought mine last year. A month later is seems to have disappeared. JC

 

[Chris2520]

Rolltide , john deere specs are a mess. you are right. the LX5 use to be listed in the 2520 section in 2006. when thay re did the website for 2007 its all messed up. here is another thing for all 2520 owners. i just found out. service tech at my dealer says the weight of the 2520 in specs is incorrect.
in the specs it weighs 1865. that is with tuff tires and wheels and it is dry.
he said a 2520 with R4's and wheels full of fluids. it weighs 2086 pounds..
and a 2320 really does weigh 1660...
he said he thinks the reson thay scimp on the weight of 2520
is so people want think it is to much to use as a mower. he said its something about people seeing over 2000 pounds might turn them away.
i personaly dont care. a 2520 is the starting point of a commercial tractor.
its says right on one of the deere site its more for the industrial user. i want to play in the dirt , not cut grass. i dont see the big deal. 3320 can be used as a mower it is heavier even a 4000 seris can be used as a mower. he felt the 2520 was pushing it as a subcut. and really should be concidered as a regular tractor. and deere wanted to push it as a cut.

 

[ChuckinNH]

In my experience any bucket on a backhoe smaller than 12" is likely to pack tight with clay. I have trouble with my 12" bucket more times than not with sticky clay......

 

[Phunge]

In my experience any bucket on a backhoe smaller than 12" is likely to pack tight with clay. I have trouble with my 12" bucket more times than not with sticky clay......

Good to know about the small bucket. I didn't think about that.

 

[vintagemilano]

vintagemilano I noticed you are in Canada what did you end up paying if you don't mind me asking?

2520 with 200CX was 21,5 plus tax. Then I got the rear tires loaded with calcium on my own after that. Pretty bare bones compared to your path but we are broke....