It’s here!

[ptsg]

Surplus Center has the adjustable ones.

 

[tacticalturnip]

I need restrictors for my snowblower chute controls, where is a good place to find them?

I found them at Tractor Supply Company while looking for a new male fitting- I broke one on the top link.

 

[raceguy18840]

Very nice!

 

[Slowpoke Slim]

I need restrictors for my snowblower chute controls, where is a good place to find them?

Bolt on Hooks has them. I just ordered 4 yesterday.

Hydraulic Parts - BoltOnHooks LLC

Price was great, and they shipped same day (Saturday).

 

[steve tym]

I'll be damned, I didn't know you could buy them, I've been making my own.

 

[Torvy]

I'll be damned, I didn't know you could buy them, I've been making my own.

Maybe you should be selling them!

 

[CloverKnollFarms]

Got the urge to check the front axle fluid tonight… nothin on the dipstick.

It says to measure without the cap screwed in.

Added almost a quart of 80w90 to get it in the range. Added a total of 1.5qt to get it near the top. I have 15 hours on the unit. Never really used 4wd. Total capacity is about 2 gallons. I’m sure it’s fine, but it appears to have been missed on pre delivery.

 

[jyoutz]

Got the urge to check the front axle fluid tonight… nothin on the dipstick.

It says to measure without the cap screwed in.

Added almost a quart of 80w90 to get it in the range. Added a total of 1.5qt to get it near the top. I have 15 hours on the unit. Never really used 4wd. Total capacity is about 2 gallons. I’m sure it’s fine, but it appears to have been missed on pre delivery.

That seems to be a common complaint with all tractor colors.

 

[2manyrocks]

It isn't confidence inspiring when the dealer delivers a tractor with low fluid levels. I checked my L2501 on delivery, and it arrived with low fluid levels in the front axle and the transmission.

 

[CloverKnollFarms]

I think I know why. I takes a lot of time for the level to correct after filling. It can take some driving to get the oil worked into all the crevices in the gears. I had to fill, wait a few mins, fill, wait a few mins… so I can see them having it topped off, only for it to need correcting after a few hours of use. Maybe this is why it’s so common