dmcb
Member
- Joined
- Feb 13, 2010
- Messages
- 32
- Location
- Inverness, Florida
- Tractor
- Mit dozer,John Deere 410C, Kubota, New Holland.
The good news is I am about an hour from completing the task I bought this backhoe for.
The bad news is I have no hydraulics.
The story.
Blew a hyd. hose and replaced.
Oil is full and it worked fine.
For a few digs.
While doing a dig the hydraulics wouldn't pick up the load. Dumped the load and got it up.
Tried it again and it was normal so I started digging again. 2 loads and I lost hydraulics again but this time I couldn't get it up even empty.
Let it set overnight and tried it again. Hydraulics work enough for me to get the stabilizers and the hoe up. Also the bucket.
I moved it and the transmission worked normal.
Parked it and no hydraulics. Tranny still normal.
Changed the filter and nothing.
I do have a little power steering. Turns harder than it should but I can turn it with the machine stopped.
I suspect its the hydraulic pump and I'm OK with changing that. These things happen but I want to be sure that is what it is before I do.
Also is it as easy as it looks to replace. Ya I know nothing ever is but it looks like its not to bad a job.
Any advise would be appreciated.
Thanks.
Doug
The bad news is I have no hydraulics.
The story.
Blew a hyd. hose and replaced.
Oil is full and it worked fine.
For a few digs.
While doing a dig the hydraulics wouldn't pick up the load. Dumped the load and got it up.
Tried it again and it was normal so I started digging again. 2 loads and I lost hydraulics again but this time I couldn't get it up even empty.
Let it set overnight and tried it again. Hydraulics work enough for me to get the stabilizers and the hoe up. Also the bucket.
I moved it and the transmission worked normal.
Parked it and no hydraulics. Tranny still normal.
Changed the filter and nothing.
I do have a little power steering. Turns harder than it should but I can turn it with the machine stopped.
I suspect its the hydraulic pump and I'm OK with changing that. These things happen but I want to be sure that is what it is before I do.
Also is it as easy as it looks to replace. Ya I know nothing ever is but it looks like its not to bad a job.
Any advise would be appreciated.
Thanks.
Doug