OP
Jim's Pole Barn Project - hopefully
- Thread starter jwstewar
- Start date
- Views: 56540
OP
jwstewar
Elite Member
Re: Jim\'s Pole Barn Project - hopefully
Here you can get a perspective of how much the front of the garage had to be "raised." Got me into a couple of situations a couple of times when I was trying to fill enough to get up over the floor drains - especially one I pulled them up enough to get me some slop on them. Probably not "enough" slope, but they do work. I've run water through all of them to make sure I hadn't collapsed them or squished them down into the fill to much to lose the slope that I had added to them. What I meant by a couple of situations was had the tractor in a position that had me puckering a little bit, the tractor didn't really seem tipsy, but didn't feel real comfortable for me.
Here you can get a perspective of how much the front of the garage had to be "raised." Got me into a couple of situations a couple of times when I was trying to fill enough to get up over the floor drains - especially one I pulled them up enough to get me some slop on them. Probably not "enough" slope, but they do work. I've run water through all of them to make sure I hadn't collapsed them or squished them down into the fill to much to lose the slope that I had added to them. What I meant by a couple of situations was had the tractor in a position that had me puckering a little bit, the tractor didn't really seem tipsy, but didn't feel real comfortable for me.
Attachments
OP
jwstewar
Elite Member
OP
jwstewar
Elite Member
OP
jwstewar
Elite Member
OP
jwstewar
Elite Member
Re: Jim\'s Pole Barn Project - hopefully
I've started doing some rough fill around the outside. I've got a call in to get the spouting (continous) install next week. Then I can start doing some final grade. What I eventually want is to build it up so that you can't even tell it is built up. I just want a nice gradual slope.
I've started doing some rough fill around the outside. I've got a call in to get the spouting (continous) install next week. Then I can start doing some final grade. What I eventually want is to build it up so that you can't even tell it is built up. I just want a nice gradual slope.
Attachments
OP
jwstewar
Elite Member
OP
jwstewar
Elite Member
Re: Jim\'s Pole Barn Project - hopefully
The Northeast rear corner. If you compare this to some of the other shots you can see how much our "flat" ground runs downhill. Sure did make people question why I built the garage up so high. /forums/images/graemlins/crazy.gif
The Northeast rear corner. If you compare this to some of the other shots you can see how much our "flat" ground runs downhill. Sure did make people question why I built the garage up so high. /forums/images/graemlins/crazy.gif
Attachments
OP
jwstewar
Elite Member
OP
jwstewar
Elite Member
Re: Jim\'s Pole Barn Project - hopefully
Here is my TC24 along with his new best friend the box blade being especially proud of all of the work they had done over the past few days.
One note on the little 12LA loader strength. It has been questioned here on TBN, "Has anyone every gotten a load of something that the loader wouldn't lift?" Prior to this weekend no, but after this weekend yes. But at the same time even with the loaded rear tires (WW fluid) and the 450#+ box blade, I was still able to pull the rear tires up on occasion. So all in all, I think it is balanced pretty well for this size tractor.
Here is my TC24 along with his new best friend the box blade being especially proud of all of the work they had done over the past few days.
One note on the little 12LA loader strength. It has been questioned here on TBN, "Has anyone every gotten a load of something that the loader wouldn't lift?" Prior to this weekend no, but after this weekend yes. But at the same time even with the loaded rear tires (WW fluid) and the 450#+ box blade, I was still able to pull the rear tires up on occasion. So all in all, I think it is balanced pretty well for this size tractor.
