jehiggins
New member
Where is the Neutral safety switch located on a John Deere Model 2305. I can't seem to locate it
John Deere 2305 Neutral Switch
- Thread starter jehiggins
- Start date
- Views: 1716
-
- Tags
- deere john deere
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,445
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Close to the PTO solenoid on the wiring harness.
Welcome to TBN
Welcome to TBN
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,445
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Think I would call that the "left" side. Usually the "drivers" side (USA) is the left side, and appears that is the dash or instrument panel in the schematic.
Tried, but could not find that schematic shown by jd110
Tried, but could not find that schematic shown by jd110
Last edited:
stuart.harshbarger
New member
- Joined
- Apr 26, 2025
- Messages
- 1
- Tractor
- JD850, JD420, JD2305, Ford 3600, Various
Ok, I looked in various forums to clear up this left or right uncertainty and the location of the neutral switch generally... On my 2305 at least, the switch is on the right side of the tractor when sitting in the seat. You could possibly say that it is below the seat. Way below . It is located in a cutout of the frame plate behind the right rear wheel and just below and forward from where the low/high/neutral control arm pivots.
