L5030 wiring question

[KOLBRNR]

Good morning. I have a 2005 L5030 HSTC and am installing a diverter valve for the 853 loader. I noticed in my fuse panel that I have 3 spare slots. Does anyone know where I would look for the other end of the wire? I would like to operate the new valve on a separate fuse but don't really know where to begin looking for the wire.

 

[luc]

Having empty slots on a fuse panel do not mean that thery are operational.
The same fuse panel is used on many tractors and the numbers of circuits depend on the tractor model/configuration.
Do those empty slots have metal female tabs in it?
If they don't, they are not wirred.
Usually Kubota will have at least 1 working slot labelled "accessory", most of the time for rear working lights and the end of the wire is either underneath the seat or under either rear fenders ar the connection for the rear lights.

A good spot to get "ignition on" power is directly on the main switch

 

[KOLBRNR]

Well turns out your right. When I get a good look at it I have a slot on one side of the spaces and not on the other now what I need is something to fit into the other side to accept the other side of the fuse. Ther are powered but not wired.

Thanks.

 

[dstig1]

I have kludged something together in my fuse panel for my 3rd function (diverter) that I added. A spade lug connector is just the right size to act as a fuse contact for the missing side. It isn't perfect, but it works. The one that is present int he slot is the power buss so it has +12v on it, and you just need to make the other fuse connection and then add a fuse.