Yes, with power left over to charge the battery....
The dynamo on the
BX23 is rated at 15amp output max.
The std lamps on the
BX23 draw approx 3 amps each.
The two 35watt lights I added draw (35w / 12v = 2.9 amps ea.
Total current draw for all lights = 12 amps max which is well below the 15amp output of the dynamo......
The light switch is rated at 15 amps so adding the additional load is well below it's max rateing too.
btw, that's why I went with 2ea. 35watt lights and wired them in the way I did
btw I posted about adding these lights a couple yrs ago, pics and everything