MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,089
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Neat! How many cubic feet do you estimate it to be?
Large Bucket Container.
- Thread starter stray
- Start date
- Views: 10898
OP
stray
Platinum Member
- Joined
- Jan 18, 2004
- Messages
- 709
- Location
- east TN
- Tractor
- Power-trac 422 2003 model and 428 January 2015 model
Thank you all so much. I kept you guys in mind the whole time I was building it. I believe that it is a good 35 cu ft most likely more. It is 5 ft. wide and well you can tell by that about how deep it is. I have one more small thing to do to it and then when I paint it I will post some more pics. Thanks again guys. And O yes no burning and pig rosting in this bucket LOL. Good one Schultz.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,089
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
When you're done with that project, can you post some information on your seat? It looks to be a suspension seat. Is it?
OP
stray
Platinum Member
- Joined
- Jan 18, 2004
- Messages
- 709
- Location
- east TN
- Tractor
- Power-trac 422 2003 model and 428 January 2015 model
That seat was 89 dollars at the TSC store. It has very good suspension but you sacrifice room. If you have a good back and a smooth yard you might want to stay with OEM.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,089
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Thanks! /forums/images/graemlins/tongue.gif
PowerTrom425
Silver Member
Very impressive effort stray......If I had a welder....I'd welder in the morning...I'd welder in the evening....All over my oil can..........
OP
stray
Platinum Member
- Joined
- Jan 18, 2004
- Messages
- 709
- Location
- east TN
- Tractor
- Power-trac 422 2003 model and 428 January 2015 model
Your welcome moss and powertrom thank you too. I don’t know what I would do with my PT in the winter time if I couldn’t build something for it. It hardly ever snows enough to matter around here. I did however fill that bucket up with wood and hauled it. Plenty of puckering though. Here is a picture of it holding the large and small OEM buckets.
Attachments
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,089
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Oh My!!! /forums/images/graemlins/tongue.gif
That shot gives great perspective. /forums/images/graemlins/grin.gif
That shot gives great perspective. /forums/images/graemlins/grin.gif
OP
stray
Platinum Member
- Joined
- Jan 18, 2004
- Messages
- 709
- Location
- east TN
- Tractor
- Power-trac 422 2003 model and 428 January 2015 model
</font><font color="blue" class="small">( I built one out of 1/2" plywood (box with open top and front) that I use to carry bales of hay with the forks. It is 4' x4' x 5'6"high . Holds 8 bales (400#) no PT pucker. )</font>
Didn't you post a pic of it awhile back. I remember seeing it and thinking that would be a simple way of doing what i went to so much trouble to do. Where is that pic anyway?
Didn't you post a pic of it awhile back. I remember seeing it and thinking that would be a simple way of doing what i went to so much trouble to do. Where is that pic anyway?
smartguyz
Gold Member
- Joined
- Mar 16, 2003
- Messages
- 488
- Location
- Beaverton, Oregon
- Tractor
- JD318, Power-Trac PT425 with scuffed-up green paint.
</font><font color="blue" class="small">( Did you save the other side of the tank so you can hinge them together again? That way it can double as a portable PT pig roster when you need it. All you need is a low speed hydraulic motor for the rotisserie and you'll have an all-new PT powered attachment.
Tim Allen would be proud.
Tim )</font>
Man - that's the best laugh I've had all day! Thanks! /forums/images/graemlins/laugh.gif
Tim Allen would be proud.
Tim )</font>
Man - that's the best laugh I've had all day! Thanks! /forums/images/graemlins/laugh.gif
