Large Bucket Container.

   / Large Bucket Container.
  • Thread Starter
#61  
</font><font color="blue" class="small">( Great job!!

When are you making me one!

(just kidding... /forums/images/graemlins/smirk.gif)

I am working on the grapple now. I just need to buy a cylinder to finish. I should have it by this week end.
 
   / Large Bucket Container. #62  
WHen you get it finished, let see what you've got.

/forums/images/graemlins/smile.gif
 
   / Large Bucket Container.
  • Thread Starter
#63  
I wanted to add these picks to show the importance of how far to tilt the adaptor plate forward. The oil tanks skin is 16 gauge or about .060 in thick. 1 ½ “ box tubing, all the rest was built of ¼” plate. Except the cutter bar it being a sharpened off ½ or 5/8” bar
Weld only around the edges or closes to all edges; Reframe from putting any tacks in the middle. They can cause grief buy busting loose. Let it float inside what little it will, Tie all the braces together.
 

Attachments

  • 580353-Bottom level on ground shows the tilt of the adaptor plate.JPG
    580353-Bottom level on ground shows the tilt of the adaptor plate.JPG
    95.5 KB · Views: 361
   / Large Bucket Container.
  • Thread Starter
#64  
this shows full tilt foward.
 

Attachments

  • 580358-bucket full tilt foward.JPG
    580358-bucket full tilt foward.JPG
    82.7 KB · Views: 277
   / Large Bucket Container.
  • Thread Starter
#65  
This shows full tilt back. If the plate were not mounted with a foward tilt i don't believe the bucket would carry right.
 

Attachments

  • 580363-full tilt backward.JPG
    580363-full tilt backward.JPG
    85 KB · Views: 273
   / Large Bucket Container. #66  
</font><font color="blue" class="small">( And O yes no burning and pig rosting in this bucket LOL. Good one Schultz. )</font>

This looks terrific. I have spent so much time moving mulch that I can see this being incredibly useful. Great job! However, I think that roasting a boar would be a terrific use as well! /forums/images/graemlins/smile.gif /forums/images/graemlins/blush.gif

Sincerely,

Rob /forums/images/graemlins/smile.gif
 
   / Large Bucket Container.
  • Thread Starter
#67  
I was at a church where my daughter was married and they had a barbecue made out of a tank identical to the one I made the bucket out of. I guess it wouldn't be a bad idea at that LOL. Next time i'm over there i get some pics of it.
 
   / Large Bucket Container. #68  
Nice job!!...I can see I need to learn to weld! Do you know what the weight of the bucket is and how many cubic feet?
 
   / Large Bucket Container.
  • Thread Starter
#69  
The weight of the big red can is 224 pounnds. I have really tryed it out now and it is tough. I have loaded large cuts of wood in it and even dug dirt. I would even say that it is the most used attachment i have now and i have about 16 of them. Don't know how i would do without in?
 
   / Large Bucket Container.
  • Thread Starter
#70  
Sorry I ment to put a pic with that last post
 

Attachments

  • 598022-big red can 224.JPG
    598022-big red can 224.JPG
    76.9 KB · Views: 268

Tractor & Equipment Auctions

2006 Crimson Spartan Fire 105ft. Quint Ladder Aerial Truck (A52377)
2006 Crimson...
2011 New Holland B95B Cab MFWD Loader Backhoe (A55218)
2011 New Holland...
UNUSED Under Mount Stainless Steel Sink & Faucet (A53117)
UNUSED Under Mount...
2018 INTERNATIONAL LT SLEEPER (A54607)
2018 INTERNATIONAL...
John Deere 644G Wheel Loader (A47477)
John Deere 644G...
CATERPILLAR 615C MOTOR SCRAPER (A51406)
CATERPILLAR 615C...
 
Top