k0ua
Epic Contributor
Lets see how a low end grease compares to Lucas Red and Tacky
Lets test some grease!
- Thread starter k0ua
- Start date
- Views: 4735
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,299
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
I’m actually surprised how much difference there was.
LittleBill21
Elite Member
supertech sells a red grease, not sure why it wasn't the comparison as its literally a dollar more, which i have used for years on everything including trailer bearings. 0 issues for me
supertech red
supertech red
Last edited:
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,299
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
You could spend a year testing grease and not test them all. Testing a grease that cost half as much vs grease that’s nearly the same price is a better test IMO.
Snobdds
Elite Member
I have never seen a grease related failure.
What does a grease failure look like, other than the obvious of having no grease. I mean, if there is grease in the joint or bearing, and it fails because of the grease, how can a person tell?
What does a grease failure look like, other than the obvious of having no grease. I mean, if there is grease in the joint or bearing, and it fails because of the grease, how can a person tell?
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,299
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
Most of the time a joint that was actually well greased never fails at least on residential equipment.
OP
k0ua
Epic Contributor
Same here.
newbury
Super Star Member
- Joined
- Jan 8, 2009
- Messages
- 14,008
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
For this board, where most of us use our tractors less than 200 hours/year it's probably more important to make sure it's all greased than worry about the specific brand of grease.
m1garand762
Gold Member
Generally a grease related failure is from incompatible types of grease. Many people flock to polyurea because it synthetic but if you look at a grease compatibility chart it reacts bad with just about everything. We see this at work all the time when mixed with lithium it turns to a rock as a prime example
Sawyer Rob
Super Member
I've seen grease failures two times forsure...
The grease failed to stay in a properly greased bearing, so the bearing failed...
That's a grease related failure.
SR