Lets test some grease!

[k0ua]

Lets see how a low end grease compares to Lucas Red and Tacky

 

[4570Man]

I’m actually surprised how much difference there was.

 

[LittleBill21]

supertech sells a red grease, not sure why it wasn't the comparison as its literally a dollar more, which i have used for years on everything including trailer bearings. 0 issues for me

Robot or human?

www.walmart.com

supertech red

 

[4570Man]

supertech sells a red grease, not sure why it wasn't the comparison, which i have used for years on everything including trailer bearings. 0 issues for me

Robot or human?

www.walmart.com

supertech red

You could spend a year testing grease and not test them all. Testing a grease that cost half as much vs grease that’s nearly the same price is a better test IMO.

 

[Snobdds]

I have never seen a grease related failure.

What does a grease failure look like, other than the obvious of having no grease. I mean, if there is grease in the joint or bearing, and it fails because of the grease, how can a person tell?

 

[4570Man]

I have never seen a grease related failure.

What does a grease failure look like, other than the obvious of having no grease. I mean, if there is grease in the joint or bearing, and it fails because of the grease, how can a person tell?

Most of the time a joint that was actually well greased never fails at least on residential equipment.

 

[k0ua]

I’m actually surprised how much difference there was.

Same here.

 

[newbury]

For this board, where most of us use our tractors less than 200 hours/year it's probably more important to make sure it's all greased than worry about the specific brand of grease.

 

[m1garand762]

I have never seen a grease related failure.

What does a grease failure look like, other than the obvious of having no grease. I mean, if there is grease in the joint or bearing, and it fails because of the grease, how can a person tell?

Generally a grease related failure is from incompatible types of grease. Many people flock to polyurea because it synthetic but if you look at a grease compatibility chart it reacts bad with just about everything. We see this at work all the time when mixed with lithium it turns to a rock as a prime example

 

[Sawyer Rob]

I have never seen a grease related failure.

What does a grease failure look like, other than the obvious of having no grease. I mean, if there is grease in the joint or bearing, and it fails because of the grease, how can a person tell?

I've seen grease failures two times forsure...

The grease failed to stay in a properly greased bearing, so the bearing failed...

That's a grease related failure.

SR

 

[Number15]

Just be careful mixing grease so you don't cause your own failure

Grease Compatibility Chart and Reference Guide

When it comes to lubrication in industrial plants, most maintenance people strive for consistency – the use of the same products over a long period of time. This generally allows for smooth...

www.machinerylubrication.com