LMTC

[LMTC]

Darn, that's TWO up on me. I don't recall either one, and I was/am a serious Mighty Mouse fan. "Here I come to save the day..."

From Wikipedia (who has Free Documentation License,so no copyrights are violated here) re: The Green Hornet--"During World War II, the radio show's title was used as a codename for SIGSALY, secret encryption equipment used in the war.
The Green Hornet was played by Al Hodge, who later went on to play television's Captain Video" verrrrrrry interesting.......

 

[Tom_Veatch]

...
Can a YM2210 handle a 5' Bush Hog Squealer cutter
...

I've used a 5' JD (305 Gyramor?) cutter on my 2220 without difficulty. Should be a fairly close comparison to a 2210.

My usage is on level ground (what else is there in Kansas) and without any heavy brush.

 

[Gizmo36]

I run a 5 ft Howse bush hog and a 5 ft Bush hog 305 with no problem With my 2210.

 

[Travis_R]

Gizmo36,

A 5' Bush Hog 305? Isn't that a "heavy duty" type cutter?

LMTC and others,

How does a YM2210 compare to a YM2000? I found the YM2000 to be a little small for me. I weigh in @ 230 lbs and Im 6'4" tall.


Travis R

 

[MDM]

I don't think there is that much difference at all as far as overall size. You will get a couple extra HP and the Powershift tranny with the 2210. Other than that, they are almost identical I think. You may want to go a little bigger since you have a 2000 already. Maybe the 2610 would be a nice step up from a 2000.

 

[Gizmo36]

If I had it to do again I would have went with the 2610 or 2620.

 

[passgas55]

When I first started looking at yanmars I wanted a ym1700 but after reading on here a ym 2000 would have been a better tractor for a 4' bush hog. But with LMTC deals on the 2210, it every thing goes well and the doctor releases me in about 2 months, I think I may have found my tractor. I will get me a tractor before spring.