K5lwq
Elite Member
- Joined
- Aug 6, 2017
- Messages
- 4,685
- Location
- Mineola, TX
- Tractor
- Kioti LK2554, Branson 4815C, Satoh Beaver, Speedex
I have a 3 spool Youli MB3 valve and would like to replace it. My system has a 10 GPM pump and would like to keep in that range for the valve flow rate.
Issues are there is no load checks in the valve and the valve body has a flaw that will not send full flow to the first spool. Instead it blows over the relief valve.
I have just been dealing with these issues, but really want to correct them now.
I would like a 3 spool, 10 to 14 GPM valve with float on the first spool. Need load checks on the first two spools as well. The third spool should be spring to center. I would like the joystick on the first two spools as well. It also needs to be a power beyond valve.
Any suggestions as to which valve I should get? Or, is this as good as it gets?
Here is my current setup. I do like the size of this valve as it fits within the footprint of the tractor.
Issues are there is no load checks in the valve and the valve body has a flaw that will not send full flow to the first spool. Instead it blows over the relief valve.
I have just been dealing with these issues, but really want to correct them now.
I would like a 3 spool, 10 to 14 GPM valve with float on the first spool. Need load checks on the first two spools as well. The third spool should be spring to center. I would like the joystick on the first two spools as well. It also needs to be a power beyond valve.
Any suggestions as to which valve I should get? Or, is this as good as it gets?
Here is my current setup. I do like the size of this valve as it fits within the footprint of the tractor.