Buying Advice Looking to purchase a YM1601D Need Advice

[oldiron]

I am looking at a YM1601D and wanted to get some advice, I have not seen the tractor in person only via photos. I am curious about this model as to whether it has a cast iron bellhousing or stamped sheet metal? Cant see with all the covers in the photo. Is there anything odd or strange about this model as far as parts, trans gear ratios etc? Thanks for any advice you guys can give!!

oldiron

 

[mark777]

oldiron, Welcome to TBN

IMHO: 1601D and 1610D - It just might be the best 16 PTO HP 3 cylinder tractor that Yanmar ever made. The transmission is cast not stamped metal. As with anything, the condition, maintenance, hours and history (and your location) have a great deal to do with the best or worst purchase of any make tractor.

If you've owned tractors before then you certainly know what to look for...If you haven't, then I suggest (either way) you give it a considerable 'work out' before you purchase.

Good luck, Mark

 

[oldiron]

Thanks for the info, but according to everything I have read it lists the hp at 20? must be 20 engine and 16 PTO?

oldiron

 

[mark777]

Yep. 16 PTO, 20 Engine.

 

[arthr31]

Oldiron,
I own a 1601d. It's a great tractor. I agree with Mark777, 'specially about it being one of the best 3cyl 20HP tractors Yanmar ever made. I've found it to be very versatile. The front axle is also iron, not pressed steel. Really try and see the tractor in person before making a commitment. While photos are good, they really don't tell the entire story...

...Now for the dreaded question, is this a "re-manufactored" tractor? Contact me via PM if so and you want my opinion of these tractors... Good luck. -art

 

[Jagmandave]

As the owner of a 1602D, let me add my agreement with the other owners. No problems in the 3 years I've owned mine....

 

[mark777]

Good looking rig...I just gotta add a picture of my 1610d /forums/images/graemlins/smile.gif.

 

[mark777]

And my 1601d (last year).

 

[Mickey_Fx]

Mark, is that a home made loader I see on your tractor? Have not see one like that before.

 

[mark777]

Actually no, it's from your neck of the woods. I found some here locally that an importer was installing. I tried them out and decided I would purchase the rest of what he had.

I traced it back out there...built in house by Cowlitz.

 

[JRMOPAR]

Not meaning to hijack this thread but...

I was looking at a YM1601D here locally and it got sold before I had a chance to buy. Now I've found a YM2210BD for about the same price (both are FEL). Is the 2210BD as good a tractor? As far as application, I'm looking to use a box blade, post hole digger and bush hog. Thanks in advance for any advice.

 

[MDM]

I have a 2210D and love it. I think it would work great for the applications you will be doing. You will have plenty of power.

 

[pruntyc]

As you may already know, it has over 6 more HP. And if you would need parts they would be easier to get on the 2210. So I think it is the better of the two, its the one I would buy.