m7060 engine warning 50% power reduction

   / m7060 engine warning 50% power reduction #1  

RoyKing

Platinum Member
Joined
Nov 4, 2017
Messages
839
Location
Gainesville Florida
Tractor
M7060HSC/18, RTV-X1100C
Happened after a parked regeneration cycle, it speeded up for about 20 minutes then came back down and we went back to work.

engine warning blink a few times

now stays on reduced power 50%

no buzzer

Dealer says they have to pick it up
 
   / m7060 engine warning 50% power reduction #2  
Well that sucks. Too bad they couldn’t just hook the computer up there and let ya know what it may be/ do a reset and be on your way with any luck.
Keep us posted....
 
   / m7060 engine warning 50% power reduction #3  
Kubota, like Deere, uses a proprietary ecm hookup that only accepts a Kubota Diagmaster scan tool and you cannot buy one. Dealer only item which is why I won't own a post 4 Kubota. Both mine 2002 and 2004 M9's are totally mechanical. Both make in the excess of rated pto power and both are trouble free and have been since new.
 
   / m7060 engine warning 50% power reduction #4  
I wont own any equipment that only a dealer can repair......at a huge cost. I have heard horror stories about JD equipment.
 
   / m7060 engine warning 50% power reduction
  • Thread Starter
#5  
My operator doesn't like to keep the rpm's up. So after the dealer does a forced regen I will have to come up with solution, I'm thinking at end of each day maybe I'll raise the rpm's and let run for 20/30 minutes to burn off soot, then do a shutdown.
 
   / m7060 engine warning 50% power reduction #6  
My operator doesn't like to keep the rpm's up. So after the dealer does a forced regen I will have to come up with solution, I'm thinking at end of each day maybe I'll raise the rpm's and let run for 20/30 minutes to burn off soot, then do a shutdown.

Start handing your "operator" the repair bills.
 
   / m7060 engine warning 50% power reduction #7  
For my information - what exactly is "raised rpms" for your M7060, Roy? X rpms for X time. Thanks
 
   / m7060 engine warning 50% power reduction #8  
My operator doesn't like to keep the rpm's up. So after the dealer does a forced regen I will have to come up with solution, I'm thinking at end of each day maybe I'll raise the rpm's and let run for 20/30 minutes to burn off soot, then do a shutdown.
There are ways to “deal” with the DPF and as a bonus, the egr. Costs a few grand but as another bonus you can get an extra few HP and better fuel economy...... once out of warranty I plan to look into it. My VW TDI has been happy breathing easier.
 
   / m7060 engine warning 50% power reduction #10  
My operator doesn't like to keep the rpm's up. So after the dealer does a forced regen I will have to come up with solution, I'm thinking at end of each day maybe I'll raise the rpm's and let run for 20/30 minutes to burn off soot, then do a shutdown.

Tell him if he don't run at rated RPM at least part of the time, you'll fire him...........:laughing:
 

Tractor & Equipment Auctions

2016 Ford Transit 150 Cargo Van (A44571)
2016 Ford Transit...
Utility Trailer (A45336)
Utility Trailer...
2020 Terex RL4 4000W Towable Light Tower (A44571)
2020 Terex RL4...
2006 Komatsu PC27MR-2 Mini Excavator (A44571)
2006 Komatsu...
2025 Wolverine CB-11-750F Concrete Breaker (A47484)
2025 Wolverine...
2025 Wolverine TL-12-72W Hydraulic Rotary Tiller (A47484)
2025 Wolverine...
 
Top