Massey 150

[The kid]

Here is the pic of new tractor

It looks to be in great shape. You did good :thumbsup:

 

[sweettractors]

Looks great! Ken Sweet

 

[BobG_in_VA]

Am I missing something, or do you just have one brake? Also whatcha huntin' with a flashlight? BobG in VA

 

[murphy1244]

Who's the crazy guy with the rifle and why is he standing in front of your tractor??? :dance1:

 

[captjj]

Im getting a knock in transmission but when i press down on clutch noise goes away the clutch and gears work fine does anyone have a clue what could it be orther than that the tractor works great

 

[captjj]

Its not a flashlight its a range finder and what do you mean by one brake

 

[captjj]

First of all hes not crazy just a freind that likes to hunt ??????

 

[captjj]

Thanks for that i think i did good very happy with tractor steering is great and everything tight Happy Thanksgiving !!!!

 

[captjj]

 

[BobG_in_VA]

In the other pic, it appeared to me that I could only discern one brake petal...my mistake...bobg

 

[MIKE R]

Looks good. Have fun with it.

 

[captjj]

Thanks Mike

 

[captjj]

I have a 1974 massey 150 i am getting a knock in tranny but when i press the clutch in the noise goes away it shifts in all gears fine and the clutch also seems to be fine does anybody know what the noise could be any help would be appreciated

 

[TnWV]

Captjj,

I'm no expert, but it sounds like you have a throw out bearing going bad. The tractor would need to be split to change it and I would put in a new clutch while I was in there.

 

[BobG_in_VA]

I have a 1974 massey 150 i am getting a knock in tranny but when i press the clutch in the noise goes away it shifts in all gears fine and the clutch also seems to be fine does anybody know what the noise could be any help would be appreciated

I know this may sound crazy, if you hear the knock when you have the clutch half way in (ie. at the end of the first stage) and you still hear it, but don't when you push the clutch all the way down, I'm betting you have your hydraulic (3point levers) all the way up past the "transport" line.. drop your levers down to midway and see if you still hear it... it may be pumping and against itself causing the knock. BobG in VA

 

[captjj]

Thankyou very much sounds right because this week put attachment on three point and didn't hear knock anymore ran great once again Thankyou