bearthebruce
Gold Member
- Joined
- Jul 26, 2018
- Messages
- 466
- Location
- Property is in Floyd County VA
- Tractor
- '05 Massey Ferguson 1533; '22 LS MT125
@Xfaxman, we agree. I did not try swapping A & B to see if A would seat in the B socket - good idea.
The issue with the A socket is that the plug will not stay in and latch. you can get it in, but then if you wiggle it, it will pull out. The fluid valves are not open.
We think when the plug was yanked out, something was damaged and the balls will not retain the plug.
I'll be back at the tractor on May 9. I'll try your suggestion then.
Thank you for your suggestion and time.
The issue with the A socket is that the plug will not stay in and latch. you can get it in, but then if you wiggle it, it will pull out. The fluid valves are not open.
We think when the plug was yanked out, something was damaged and the balls will not retain the plug.
I'll be back at the tractor on May 9. I'll try your suggestion then.
Thank you for your suggestion and time.