MF65

   / MF65 #11  
She looks a little rough on the rear sheet metal ( fenders ) & it looks like it took a hard hit on the lower front grille area & is missing all the lower front sheet metal below the grille area , & both headlights , & the center trim piece on the grille is missing as well.& if You can get that M-F 175 for $500 more it might be worth it for sure ! The M-F 65 at that asking price should be in better condition ! & the damage to the sheet metal should bring the price down ! Just ask if they are firm on that price , & see what there bottom line would be . IMHO I would be leaning toward the M-F 175 , But the M-F 65 could be the better running tractor mechanically.
 
   / MF65
  • Thread Starter
#13  
Well, you guys have sort of steered me clear of that 65 for now. How about this 150?
274655343_5320239304676561_4215504375528623691_n.jpg
274819146_5336918239675334_2080163619637086535_n.jpg
275013813_5336918156342009_5011506092002422200_n.jpg
 
   / MF65 #14  
i had a mf 65 but it was about worn out when I bought it. But when it was running I pulled a two bottom molboard with no issues. The nose seems to be longer than the average, but I assume it was designed like that to keep the front end from rearing up when pulling heavy loades.
 

Tractor & Equipment Auctions

New/Unused CFG Industrial MH12RX Mini Excavator (A57453)
New/Unused CFG...
2006 Mercedes-Benz Unimog 405 4x4 Flatbed Truck (A56858)
2006 Mercedes-Benz...
(INOP) 2016 FORD F150 XL SINGLE CAB TRUCK (A51406)
(INOP) 2016 FORD...
2025 MMS MS36C (A53317)
2025 MMS MS36C...
2021 CATERPILLAR 306 CR EXCAVATOR (A52709)
2021 CATERPILLAR...
2025 JMR 66in Single Cylinder Brush Grapple Skid Steer Attachment (A56857)
2025 JMR 66in...
 
Top