Mid-mover poor cut

[PA-Kubota]

MY 2008 BX2350 w/54inch cut for the past season has been leaving partly cut strips between the blades. More so when turning left and right. I have also sharpened the blades several time. Is it time for new blades??

 

[ck21084]

It just might be time for new blades man. I know when I sharpened my land pride blades on my 72" the blades where so far worn down that they had .5" of gap between then. To check see how much space is between the blade points just as they come and meet.

 

[rbarker]

MY 2008 BX2350 w/54inch cut for the past season has been leaving partly cut strips between the blades. More so when turning left and right. I have also sharpened the blades several time. Is it time for new blades??

Make sure the deck is adjusted and leveled properly and your tire pressure is correct. Then make sure your spindles are all well greased and turning freely. I guess it could be worn out dull blades but deck alignment can definitely cause those issues.

Sent from my iPad using TractorByNet