Most useful wrench

   / Most useful wrench #1  

repete

Veteran Member
Joined
May 26, 2008
Messages
1,153
Location
SW Washington
Tractor
L2550DT IH584-4WD
It is my opinion that the air die grinder is about the best wrench for removing stubborn nuts ever made. :)
 
   / Most useful wrench #4  
49E94BD2-48AC-4A98-B65C-58BFEFE6F020.gif
 
   / Most useful wrench #8  
Had a nut on top of a shock on a Chrysler many years ago. That nut splitter Xfaxman shows worked great in a limited access situation. Still have it to use occasionally.
 
   / Most useful wrench
  • Thread Starter
#9  
I had to use the die grinder to cut the frozen nut off the end of a hydraulic flex hose going to a piece of steel tubing. No impact of nut splitter. I tried heat with no success. Finally ended up cutting the female fitting.
 
   / Most useful wrench #10  
I like the die grinder too..
So much so I have them in various sizes..
I even have 1 that plugs into the wall socket.. actually it WAS the wife’s nail polisher.!! Very small device..
w various heads.. comes in very handy..
 

Tractor & Equipment Auctions

2008 Audi A4 Sedan (A46684)
2008 Audi A4 Sedan...
2013 GMC Sierra 2500HD Ext. Cab Pickup Truck (A45336)
2013 GMC Sierra...
2023 ROAD FMAX216 40FT GOOSNECK FLATBED TRAILER (A45677)
2023 ROAD FMAX216...
New Long Forks (A48289)
New Long Forks...
2015 Portable Restroom T/A Trailer with Trash Storage Compartment (A45336)
2015 Portable...
2005 towable water pump (A46684)
2005 towable water...
 
Top