Most useful wrench

   / Most useful wrench #1  

repete

Veteran Member
Joined
May 26, 2008
Messages
1,155
Location
SW Washington
Tractor
L2550DT IH584-4WD
It is my opinion that the air die grinder is about the best wrench for removing stubborn nuts ever made. :)
 
   / Most useful wrench #4  
49E94BD2-48AC-4A98-B65C-58BFEFE6F020.gif
 
   / Most useful wrench #8  
Had a nut on top of a shock on a Chrysler many years ago. That nut splitter Xfaxman shows worked great in a limited access situation. Still have it to use occasionally.
 
   / Most useful wrench
  • Thread Starter
#9  
I had to use the die grinder to cut the frozen nut off the end of a hydraulic flex hose going to a piece of steel tubing. No impact of nut splitter. I tried heat with no success. Finally ended up cutting the female fitting.
 
   / Most useful wrench #10  
I like the die grinder too..
So much so I have them in various sizes..
I even have 1 that plugs into the wall socket.. actually it WAS the wife’s nail polisher.!! Very small device..
w various heads.. comes in very handy..
 

Tractor & Equipment Auctions

2011 PETERBILT 365 WIRELINE TRUCK (A45333)
2011 PETERBILT 365...
6in. Hydraulic Auger (A49339)
6in. Hydraulic...
Terms and Conditions (A42021)
Terms and...
2017 CENTAURO TANDEM AXLE DRY BULK TRAILER (A45678)
2017 CENTAURO...
42x16 Rim (A46502)
42x16 Rim (A46502)
42in. Skid Steer Forks (A49339)
42in. Skid Steer...
 
Top