MX class 2 hitch

[saray]

I'm considering buying the MX48 and would like to know can I still run my class one devices with a class 2 hitch?

 

[MessickFarmEqu]

with bushings

 

[Peter 315]

YES you will need bushings for the cat 1 pins about 3 to 5 bucks each

 

[saray]

Thanks was trying to decide btwn l4701 and mx4800 guess that answers it

 

[pburchett]

I was looking at the same two tractors. My dealer did not have the MX4800 so I went with the MX5200 as it was only $1000 more than the MX4800. You can use the Cat 1 implements just have to use bushings to take up the difference at $2 each from tractor supply or change the pins to Cat 2. Since I have another tractor that uses only Cat 1 implements I just use the bushings. The adjustable ends are on the MX link arms are a must as it would be almost impossible connect equipment from the tractor seat.

 

[Newby first timer]

I was told by my dealer that The MX4800 comes with the bushings as a stock item
Hope so cus I ordered an MX4800 and then upgraded to the MX5800

 

[Peter 315]

If not there only a couple $, Tell the dealer to throw them in plus a hat

 

[cold1313]

My MX5800 came with bushings in the tool box. That was in November.

 

[Herkypilot]

My MX5100 came with bushings in 2011..:thumbsup:

HP

 

[rbtjr]

We have a MX5800. We installed Pat's quick connect system, using their option that fits the Class 2 MX lift-arm size and reduces it to a Class 1 o the hook-up end. We did this because all of our implements/attachments are Class 1. This set-up works great for us. If we ever want to go to Class 2--which is doubtful--we will use the bushings referred to above.