Fallon
Super Member
The front & optional rear cab lights suck. They are just a cheap halogen bulb with moderate light at best. A LED cube or mini-bar will do you a lot better & cost less than the $120 Kubota wants.
All the wiring is already there. You just need to plug in the switch & connect the wires to the lights. Connectors are a bit funky on the lights, so probably easiest to cut them off & put more common ones on.
I went way overkill on mine with new wiring, a new fuse/relay box & 46-52" LED bars. Might just have gone with mini bars on the stock wiring if i had it to do over again. Would take me an hour to install 4 maybe a hair more if I had to pop the roof the find the ends of the wires tucked up under there. https://www.tractorbynet.com/forums/customization/376458-let-there-light-l4060-light.html
All the wiring is already there. You just need to plug in the switch & connect the wires to the lights. Connectors are a bit funky on the lights, so probably easiest to cut them off & put more common ones on.
I went way overkill on mine with new wiring, a new fuse/relay box & 46-52" LED bars. Might just have gone with mini bars on the stock wiring if i had it to do over again. Would take me an hour to install 4 maybe a hair more if I had to pop the roof the find the ends of the wires tucked up under there. https://www.tractorbynet.com/forums/customization/376458-let-there-light-l4060-light.html