My Kubota B2150

   / My Kubota B2150 #41  
Here are some photos of the grill guard that was on my B8200 with LA350 loader. This was a factory guard.
 

Attachments

  • 35-150769-grill.jpg
    35-150769-grill.jpg
    126.9 KB · Views: 1,547
   / My Kubota B2150 #43  
I'll have to delay until tomorrow on the pictures. I got the seat time today (various dirt/gravel/mulch moving projects at my church), but swapped vehicles at the last minute and left my digital camera in the wrong vehicle. I have both the tractor and camera at my house now but it is dark outside. So maybe tomorrow...

Kelvin
 
   / My Kubota B2150 #44  
I didn't realize that the LA350 loader also fit the B8200. I'll add that to my book of knowledge (the book is approaching 1/2 page in length...).


Kelvin
 
   / My Kubota B2150 #45  
After looking at different LA350 grill guards, I will now say that I don't know if there is a "standard" grill guard; at least I have never seen two alike yet.

Attached is a picture from the LA350 manual of how to install the optional grill guard.

Notice that, in addition to protecting the front grill, it is designed to protect the front corner of the hood. The grill guard is designed to fold forward allowing the hood to be raised. Even though this grill guard doesn't look the same as mine, it is a similiar design. I will post my pictures next.

Kelvin
 

Attachments

  • 35-151113-Grill.jpg
    35-151113-Grill.jpg
    83.3 KB · Views: 629
   / My Kubota B2150 #46  
Attached is a photo of one corner of the B2150's LA350 FEL grill guard.

Kelvin
 

Attachments

  • 35-151116-Dcp00722-2.jpg
    35-151116-Dcp00722-2.jpg
    81.7 KB · Views: 1,334
   / My Kubota B2150 #47  
Attached is a "close up" photo of one corner of the B2150's LA350 FEL grill guard.

Kelvin
 

Attachments

  • 35-151117-DCP00727-2.JPG
    35-151117-DCP00727-2.JPG
    71.8 KB · Views: 579
   / My Kubota B2150 #48  
And here is a picture of my B2150's LA350 grill guard in the folded down position.

Kelvin
 

Attachments

  • 35-151119-DCP00723-2.JPG
    35-151119-DCP00723-2.JPG
    78.7 KB · Views: 545
   / My Kubota B2150 #49  
Kelvin,
I think your grill guard is not a factory piece. I did notice on my LA350 frame that there are tapped holes near the front and a regular hole about 6"-8" back. I figured this was for the grill guard. Looking at your scan of the manual, I confirmed this. This all will help a lot!!
John
 
   / My Kubota B2150 #50  
John,
I'll agree with you that my grill guard is probably not a Kubota original, unless Kubota made more than one kind of grill guard (which I doubt, but who knows?).

Kelvin
 

Tractor & Equipment Auctions

2014 CATERPILLAR CT6605 SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
2020 FABRIQUE H9618TRTV-100 18FT ENCLOSED TRAILER (A51222)
2020 FABRIQUE...
2012 John Deere 7280R MFWD Tractor (A51039)
2012 John Deere...
2017 Ford F-150 Ext. Cab Pickup Truck (A50323)
2017 Ford F-150...
2000 MACK RD688 TRI AXLE DUMP  TRUCK (A51222)
2000 MACK RD688...
2003 FREIGHTLINER FL80 DUMP TRUCK (A51406)
2003 FREIGHTLINER...
 
Top