kubota b2150

Hi there could anyone tell me does the kubota b2150 have a transmission filter, and where it is located, any help would be greatly appreciated thanks

Does this sound right? The dealer service manager is telling me that he cannot get a new B2150 steering box or rebuild the existing one to stop the leaking. He further tells me that he cannot repair the gear box on the mowing deck which had a catastrophic failure also because parts are not...

I have a 1100 hr B2150 that other than a slight oil leak from the steering seal runs flawlessly. I do also need a new gearbox on the mowing deck. But other than that she starts every time and does what I ask without fail. I have been eyeing a B2601 with QA and third function and a rear...

Need some help/ ideas. Kubota 2150 ran great yesterday. Started fine this morning. Raised loader so I could remove some brackets for the mower deck. I finished up and the loader had drifted down a little( which I expect) and then I lowered it all the way down while tractor was off. I went to...

Never mind why I have 3 Kubota B2150's. The first 2 are stick trans and the latest one is hydrostatic. The latest one obtained this summer from the midwest required only minor mech stuff to get it serviceable using the MMM (and whatever else I decide to do with it.) Now for the problem...

My B2150 gear tractor just started “banging” when driving forward like once a second when advancing slowly. It doesn’t make noise in reverse. Doesn’t matter if the clutch is pushed in. It does it all 3 ranges and with our without 4wd engaged. It sounds like it is coming from the tunnel...

Since I got my grapple I've had several close calls with branches that did not want to play nice. And 1 that remove a piece of the engine surround. So, its grill guard time. I made this from some things I had laying around, All but the expanded steel. I cut and bent the pipe then welded the...

I want to say a special thanks to Travis @EverythingAttachments for all his help to make this happen! The B2150 is not a big tractor by any means. So adding a grapple to it meant it had to be as little weight possible, but I wanted one with durability too. Adding a Quick attach system with the...

First I want to say I knew little to nothing about hydraulics when I got this tractor. Back story; We had a wind storm last Dec. and several trees and limbs came down at our property as well as at my Mom's place. I'm not a young buck anymore, and our kids are out of the house now. So how do I...

I'm new to diesels over all, and now I have 2. My 2150 seems to be harder to start recently. I first noticed it when it was cold out, and figured that was why. But now that it is warm again(40-60°F) it is still starting hard. By hard I mean long crank times. It has a manual glow plug system when...

The LR flasher light was missing from the tractor when I got it. So the search was on for OEM old style light. I looked on Kubota web site for reference #s for the light, but most were "replaced by...". I picked up one of the "replaced by" lights and it was not even close to the original. So the...

Hello all. I have a B2150 that has slightly oversized tires that were installed by the previous owner. Current size is 24x8.50-12" front and 13.6x16 rears. All are turf tires and use chains on the front for snow removal. The fronts hjave beed plugged several times and are very dry rotted. The 1...

Started mowing with a new to us B2150. It came from a well respected equipment dealer and seems to have been well cared for. The issue is that is seems to run pretty hot, and it isn't summer yet. The temp gauge is at about 75%. Is it normal to run so hot for this machine? Any suggestions? Oil...

1050 hours on 24hp diesel.Belly mower with 3 point hitch and PTO. Front tires new and rears are in great shape. Great running machine. We have two other tractors and are not needing this any longer

Have been looking into replacing rear tires and learning about the importance of Rolling Circumference on a tractors 4wd. To confirm that the tractors current front and rear tires have the correct RC to match the Mechanical Ratio for Lead and Lag, I marked a front and rear tire then drove in...

Hi, Looking at adding either 2 or 3 inch rear wheel spacers to the B2150hst 4wd. I live in very hilly, steep, terrain and would like to make the tractor more stable. It currently has offset wheels and R1's loaded for ballast providing a total width of 63 inches. The tractor also has a fel and...

My B150 is leaking fluid. Big stain on the garage floor cardboard. Dip stick is dry. Hydro is cavitating just a bit in high. Dealer is closed. Got a quart of JD low viscosity Hy-guard from the JD dealer who was open. Dare I substitute? Just got 16 inches of snow and need to plow but don’t...

I have a Kubota B2150 which is fairly new to me. Currently, it doesn't have a FEL (or any hydraulic implements). If I were to locate a FEL to fit the tractor, what modifications would I need to make to the tractor? The only hydraulics it has now is to operate the 3 pt. hitch. Thanks.

I have a B2150 with turf tires and a 3pt snow blower mounted. I ordered a set of rear ladder chains but didn't realize that I didn't have enough clearance between the tires and fenders to use them. There's only about 1" of clearance, as is. Bro-Tek sells 2" spacers for this tractor. A couple of...

I need to replace the oil pressure switch on my Kubota B2150. I have the part ordered. Is the replacement pretty straightforward or is there anything I need to be aware of? Looks like just backing the old one out and replacing it with the new one? Thanks

I'm trying to figure out the easiest way to add a block heater to a B2150. One side of the engine has a couple of freeze plugs, which I am hesitant to remove. I've seen mention of a plug which screws out using a 17 mm hex wrench, but can't find one. I did however find a plug with a raised hex...

Anybody know what this lever does? No owners manual. I am sure it is something obvious but I cannot figure out what it is.

I have a Kubota B2150 with turf tires and a 60" rear blower mounted on it. I've added front weight to even out the weight distribution. My gravel driveway is mostly flat but has one short, steep hill in it. I'm considering getting chains for it. Would standard ladder chains work ok or should I...

I am close to buying a new tractor and need to sell my B2150 to help fund the new purchase. I am hoping you all can give me some feedback on how to price it. It is a B2150HSD/HST with Bi-Speed Turn. LA350A FEL, RC60-21B (60") Mid-Mount Mower, Drawbar, Upgraded Dynamo (40 Amp), Turf tires in...

I just bought a B2150 with a belly mower. It starts and runs great but I have a simple question. It seems the mid & rear PTO's are hard geared together. Am I right about that? The selector is 748 rpm, 0 rpm and 540 rpm. The problem is, for years I ran a comet pressure washer pump off the 540 PTO...

Need Fuel tank for Kubota B2150

Looking for a fuel tank for Kubota B2150HSD. Anyone know of aftermarket tank or used tank? New tank is $1100.00.

Hi all. I have a B2150 and it has a crack in the seat. Does anyone have any suggestions on a replacement seat? Should I go OEM or an aftermarket seat? Thanks.

Hi All. I have a B2150 and was going to change/clean my air filter. I have read that some Kubota models have TWO air filters. A primary(outer) and a secondary/safety (inner) air filter. Does anyone know if my B2150 has one, or two, air filters? Thanks !

Anyone familiar with this sub-model? My googling does not bring up any details on this particular model. What I do know is that it's a 2WD and has a NON-hydrostatic transmission. My end goal here is tracking down an owner's manual and shop manual. All that I can find are what I believe to be...

Hi Everyone - seems like a lot of "engine bogging down" posts here...sorry for another. Bought a 1996 Kubota B2150 last weekend. 100 hours on it. I've been mowing my fields with a King Kutter 4' rotary cutter - just grass (8"-10", max) and no brush. I got through the first hour of cutting just...

Hello, wondering if anyone has encountered a problem on a Kubota B2150 hydrostatic drive with rear wheel spin when turning right or left. It doesn't appear to matter if I am in 4WD or not. Its like the one wheel just tears up the grass or drive way when I turn sharp. If I turn left, the left...

Hey, trying to untangle a mess from a few years ago. This setup works fine but I have to mess with a selector switch when going from BH to FEL. I would like to just connect the two hoses at the rear of tractor when not using the BH. Any ideas??

On the outside of the bucket are some pockets, and on top of the bucket is a threaded square nut. They look original to the bucket. What could they be for?

hi im looking for pallet forks for my b2150. i tried clamp on forks but they tipped the tractor up .and i dont have any lifting power. can anybody help? thanks captain carl

So earlier this year, i broke my power steering shaft. The shaft sheared off the hole where the bolt goes through the steering column. Anyways, I replaced it. But ever since I replaced it, the hydraulics seems to not be working. Steering is hard and the three point hitch does have the...

My Kubota b2150 will not lift under load, with out a load it lifts easily. but with a load it won't lift. I changed the hydraulic fluid and filter. there is only one filter on this tractor. Are there any screens? I did not see any.

Kubota B2150 differential lock stuck in locked [solved!] Hi all, title says it all. My dad recently bought a second-hand Kubota B2150 from a friend who was moving away and it seems that the diffeential lock is stuck on. It has a huge turning circle because if you turn the front wheels more than...

loosing power have change fuel filter and still have the same problem it will not idlle it will go up past 500 rpm it did one time got past 2000 rpm for about 10 mins, need help fixing?

Anyone know where I can find the correct 3 point kit for the B2150? Or have the measurements Thanks

Have a B7100 with Lawn tires on it. Want to put something more aggressive for some clearing work. will the wheels off a B2150 fit a 7100??

I have a B2150 with a power beyond valve on the tractor (3 lines) that feeds a FEL valve. I have a backhoe that currently uses a PTO pump that I want to drive off of the tractor. I also want to run a broom and have rear hydraulics. Does anyone have any schematics to do this?

Hi, I really like my b2150 hst but it has 2700 hours and its time to upgrade. I am having a hard time finding out what model Kubota released that replaced the 2150. Any ideas. thanks

I am wondering what would be a good price for a 1992 kubota B2150 with fel and backhoe ? It has around 1000 hrs on it and looking at pictures of it looks good . Barry

Hi All. I have a B2150 with a LA350A loader. One of the hoses from the tractor Hydro controller to the loader controller has developed a pin hole and is leaking. I have to replace it. Does anyone have any tips on the procedure ? Can I just relieve the pressure with the joystick and then...

Do I need to pull the housing to remove the axle ? I have a parts schematic and I have tried to search but I am still unsure .

Hello and thanks in advance for any advice. There is a Kubota B2150 HSD 4x4 Tractor with (they say) a BF350-A Front End Loader. I think they mean LA350. I haven't seen the tractor yet. It's coming up at a 7/14/13 auction. It has 3713 hours, but is said to work fine. I imagine it will sell...

Anyone have a service manual for a b2150 (HSD) that they are willing to part with? An electronic copy would be great too. Please let me know, thank you.

The oe loader valve for the LA350A on my B2150 Kubota tractor was shot. The local Kubota dealer wants $1200.00 for a new control valve. I bought a Brand Hydraulic valve instead, but the loader will not lift or tilt. Any suggestions?

Hi, does anyone know the center distance between the three mounting holes on the front axle mount on their b2150. the three holes have a square block welded to it for mounting different subframes and are located rearward of the front wheels. i need to know the distance between the three bolt...

My father recently purchased a b2150 that was not maintained very well.The transmission 3 range selector lever will not budge from the medium range position.Any ideas? Is it just stuck at the pivot point? Frustrating! !! thanks

Hi All, with being a new tractor owner i'm finding out quickly how "tractors" for us novices, are very expensive items to have. after long hours of research i found that the tail light fropm a 56 Chevy will work as a replacement fot he tail light lens on my b2150( and most likely plenty of...

Hi everyone. Proud owner of 1996 B2150 Kubota. 2WD. Only have Woods Back Blade right now. , I have been watching and learning and figured i would sign up. hope to share some things i have learned already. kjgces.

I bought a used 7100 a few years ago. WhenI went to get parts, none of the parts for the 7100 matched. The dealer found a few parts by searching the parts bin. He figured that the parts fit a 2150. Is there any way of finding out for sure which parts list I really need? The tractor has a 7100...

I've recently found for sale a B2150 HST with FEL and a Rhino backhoe w/ approx 1,000 hrs. After some preliminary checking with the current owner of the Rhino brand (Alamo) I learned that most BH parts are no longer available. The B2150 has a 1.2L 4 cyl engine. What experience does anyone...

Hi. I have a B2150 and wanted to add some LED work lights. Since I will be using LED lamps, the Wattage draw will be less than a standard type bulb. But does anyone know how much wattage draw I can add to the B2150 with the standard alternator ? I have seen LED lights which draw anywhere...

I currently have turf tires on my B2150 that are worn and need replacement. I'd like to put ag tires on. I know they don't make the tire size that I currently have on there. Can anyone tell me what size tires to get (all four need replaced, need correct ratio) and where I might find them?

Hi my name is Dave and I live in Zeeland Mi. I have a Kubota b2150 4wh. It has a center Pto and am looking for info in putting on a front blower. I picked up a kubota 60" rear mount and am looking for info on mounting on front using the center pto.

I am wanting to add rear remotes to my B2150, I am "building" the system because I know I can do it cheaper than factory remotes, I understand how to do everything except where do I tap into for the hyd flow there is a block on the right side that has hyd lines going into it and is capped off...

Hi. I've got a B2150 and have located a used Leinbach L-7200 which I am interested in buying to digs holes for a deck I'm building. Does anyolne know if that L-7200 is OK for the B2150 tractor ? Thanks for any help.

I just bought a Kubota B2150 tractor and it appears as if the lights don't work. The hazard flashers work, but the headlights and taillight do not come on. The dash lights work also. I have been looking for the fuse box to no avail...I do not have an owners manual, so have no idea where to look...

I just bought a Kubota B2150 tractor and it appears as if the lights don't work. The hazard flashers work, but the headlights and taillight do not come on. The dash lights work also. I have been looking for the fuse box to no avail...I do not have an owners manual, so have no idea where to...

Hi all, New member, first post. After doing several weeks of research and pricing on used tractors - mostly craigslist and this excellent site - I believe I have settled on buying a B2150. I think I'm getting a pretty decent price but wanted to run it by the experts here. Actually, the guy I'm...

Hi folks, I'm new to this forum. I recently bought a B2150. I'm not sure whether I need to add an overrun clutch to the PTO shaft in order to safely operate my brush hog. I needed one on my old tractor, but I suspect the B2150 PTO works differently and doesn't need one. I'd rather know for sure...

I had my local dealer pick up my B2150 for the "Spring Service" and to check into a slight "hesitation" when I am traveling and then turn. He has had it for nearly 3 weeks now, and today he called me and said he had completed the regualy maintenance but the mechanic said that the "Throw-Out...

According to my local Kubota dealer the only new loaders available for the B2150 Kubota are the Woods brand AND Woods does not make one for the standard transmission model, only for the HSD. The claim is that the frame is different, etc. Anyone know of a source for FELs for Kubota B2150 ?

Mine has a repeating problem. The main line from gear pump to main block(bolts on with three bolts to pump, is about 16 inches long and bolts to block with one bolt) is cracking right behind the front mounting where the line comes out. Have had it braised and breaks there again. Have ordered new...

I've got a '94 vintage B2150 with about 750 hours on it. The battery is 4.5 yrs old and just starting to show its age in this colder weather. I expect I'll be replacing the battery in the near future, but we'll see... The question is that even when I have a fully/freshly charged up battery...

I bought this machine last spring. Working great have done a lot of mowing and general work with the fel. Tractor has 1000 hours. I was out plowing and the loader has started acting funny. It goes up very slow. It takes minutes to get all the way up. Down, roll and dump work fine. Rear...

I was out plowing and my rpm's kept going down. Over the course of an hour it got worse and worse. So, I went down and bought some anti-gel diesel additive, after I checked the air filter (which seemed fine). The machine fired right up and ran well for maybe two minutes then started the same...

I'm looking at a B2150 w/ a LA351 FEL & 60" belly mount mower. It has 1330 hours & AG tires that I would guess are at 70% for the rears & 50% for the fronts. Overall appearance is OK - some dings & faded paint, but does not look like it's been abused/neglected. The tractor is at a Kubota...

One of my tractors is a B2150. I recently took it to a shop to have the dryrotted hydraulic lines replaced. This unit has a front blade. This person managed to get the hydraulic lines back together wrong. In order to lift the rear hitch you must be operating the blade. I do not see any reason to...

Currently I have a B2150HSD with the dynamo to charge the battery. Of course with the added lights for night time snow plowing I do a pretty good job of discharging the battery. I have considered the option of LED lighting but I don't think they put out the lumans that my 55 watt halogens do...

Hello. I have a B2150. EVERY 700 hours the clutch shaft and clutch go out of my tractor. Kubota claims that no one else has ever had this problem besides me. However, this is the FOURTH time I have replaced it (every 700 hours like clockwork). The first time it was replaced by Kubota...

Hi everyone, I'm a warden on a Scout campsite, and about 3 years ago we bought a Kubota B2150, which I think is an absolutely fantastic machine. Unfortunately we've had a few problems and I was wondering if anyone could offer any advice... When we agreed to buy the tractor, it had a 5ft John...

How big of a job is this? Anyone ever replace one? It looks like it broke right in the middle of the lever before it connects to the more internal throttle control. I need to know if there are multiple pieces to the throttle lever (it looks like there are??) Thanks in advance.

My B2150 starts and runs fine. This last winter however I noticed that it would begin to lose power towing our manure spreader. It would almost sound like it was missing. I would let it sit for a minute or so at idle and then could continue on without issues. Today while brushhogging it did...

Theirs a b2150 hst 4x4 with loader and bh for 4500$. Not sire of the hours looks used but not to bad. The bh is a faded yellow color not sure of the make. Just wondering if this is a good, bad or average price if it runs well. Thanks for all replys and any other info on b2150's.

B2150 SOLD!! B3030 on the way!! with LA403 FEL,60IN.MMM, R-1 Tires,Rear Remotes. Christmas in March.

I recently put my Kubota B2150 on here for sale, Can someone tell me how to add pictures after the initial add ? I guess I sound like the village idiot but I'm no computer guy. Thanks, Bret

Hi all,just bought my first tractor:p and I have two questions, first how can I tell what year it was made? Two,it has the 13.6x16 turfs on back and r-4 on front(wrong size) should be 24x8.5x12 and they are 23x8.5x12. should I take them off they look like new,or can I buy r-4's for the back that...

Hello All, My ignition switch has been giving me problems for a while now, and appears to have stopped working all together. The specific problem is with the "glow plug" position of the switch. For a while, I've had to play with the switch in order to get the glow plug light to come on, and...

think about buying a 1994 b2150 6 ft mid mount mower 790 hours cutting 2 acres hilly, i concerned about the 6 ft mower , how it will do on a hill,scalping or plowing on one side. any input from owners would be nice thanks

I,ve been lurking around the forum for a couple of years and have just joined. So I'm the new guy in the pasture. There is a 96 B2150HSD with a FEL and Back hoe for sale in my neck of the woods that I'm interested in. It has 214 hrs and is in very good shape. He is asking 15.9K for it.Does this...

I connected the single acting cylinder on a rack wagon hoist to the valve port that goes to the up (piston) side of the FEL boom. I can raise the hoist by pulling the stick...the wagon bed goes up rather than the loader. The only way I can lower the wagon bed is to shut the engine off and put...

I need 1 or 2 Firestone or Bridgestone 24X8.5-12 new or used. If not, anyone running any other substitutes that meet the 4wd ratio with 13.6-16 rear tires ?

Does any one have any sggestions on pricing a one owner B2150 with 1200 hrs. Tractor is well maintained with FEL. Rear Finish Mower, Rotory Mower, and Rear Blade. Many thanks in advance. Daro

My B2150 would run fine for about 5-10 minutes, then lose power, RPMs would drop and the engine die. I changed the fuel filter and it ran well for about 10-15 minutes. Then it lost power, RPMs dropped and the engine quit. Now it won't start or fire at all. Do I have air in the fuel system...

Hi, I have a B2150HST which has a fluid leak around the steering column. I followed the instructions in the following thread http://www.tractorbynet.com/forums/kubota-owning-operating/96400-b2150d-power-steering-hydraulic-fluid.html to replace the oil seal and the bushing near the top of the...

I'm contemplating upgrading from my B7100HST. My B7100HST is a late-model (I'm told by PO '98) with a Woods DuAl 145 quick-detach loader. I have brand-new turf tires and wheels on it, plus the original tall & narrow-style R1's. I love the B7100HST, but there are two things I feel it...

hi,im looking at a b2150 4x4,hydrostat,with belly mower,and has bisteer.the tractor has 1200 hrs on it and is in good condition.owner is asking $6000 for it.does this seem like a fair price?

While torn down to replace the axle housing on my 2150, I decided to work on the loose steering. I replaced the worn rubber bushing on the steering wheel shaft, but still have a lot of left to right play before the pitman arm moves. There is a large adjustment screw with a lock nut on the...

I snagged a concrete pipe from one end while pulling a boxblade, which cracked the left rear axle housing on my Kubota B2150HSD. The hairline crack is located in the housing between where the lift arm pin is bolted on and the axle housing area. The crack is so fine it took a while to locate...

WANTED repair manual 93 b2150 gear kubota Anyone have one they would like to sell. Thanks

New to forum ,i removed the cover for shift lever and found a broken fork for the reverse gear. Does anyone know how to remove the shaft so the fork can be replaced?

What is a 1993 B2150 Hst with 1350 hours great bent front end loader, and 72in mmm worth? Tractor is in very good shape new tires on front some wear on rear one. no problems with tractor. Paint good also. Any price ideas? Thanks in advance!

Someone please tell me if forks for a B2150 would fit a B7800. The B7800 doesn't have quick connect bucket. Thanks.

Hello, Recently my 2150 developed a 2 part problem that I do not understand. Previously when I turned the key to off the engine would shut down. It no longer does that. So I can use the fuel cut off lever. But after pulling the fuel cut off lever (and resetting it) the tractor no longer wants...

I'm looking for information on where to order or purchase a toothbar for my B2150. I am loacated in the central area of the lower pennisula of Michigan.

I recently bought what was represented to me as a B2150HST. However, on the transmission is a tag designating it as a B7100HST-D, 4 cycle, 3 cylinder. The engine is a 4 cylinder. Any comments would be welcome. Thanks, Terry

Can anyone provide information or comments on adding a back hoe to a B2150HST. Compatable model or make info would be appreciated? Thanks, thl

Can anyone tell me what the aftermarket equivalent would be for a headlight bulb for a B2150HST circa 1992? Perhaps a Wagner Part Number for instance?

My B2150HST is not charging properly. I disconected the dynamo and tested the AC voltage. It is charging at 15.5VAC. Output at the battery is 12.33DC. The trouble light on the panel is lit. I suspect the regulator is bad. Any comments would be welcome. Thanks, Terry

I recently picked up a B2150 HSD with turf tires. The fronts are 24X8.5-12 and I had a leaking stem. I brought it to my local tire store to get the stem replaced. This rim is the type that has bolts holding the 2 halfs together. They told me the rim had to be seperated to get a new stem in...

Skip loader control valve very touchy and quick. Operatiing on rough ground with a loaded bucket can be a rodeo. Could use some advice on slowing the hydraulics down. 3 point lift is fine but that control ( under the seat ) is for that only. Help ???

Looking at house with 12 acres and they have a hydro B2150 w/374 hours, LA350 loader and Brush Hog that could be included. Not sure of the year, dent in the front edge of the hood and the exhaust is bent back about 45 degrees. Any suggestions on the value the little Kubota adds to the...

the kubota B2150 HST's transmission filter has a 1 1/16" hole and i can not find a OEM replacement filter to buy.... the purolator 1A is the same physical size but the Purolator hole is 3/4", ditto a Fram... the kubota tranny filter, if bought at the kubota dealer runs $30 some dollars...

Hi. Before I dropped my mower for the winter season, I wanted to mow the grass one last time in the front of the house. I have a B2150 with about 500 hours on it and was using a belly mower. I started losing power rapidly and almost came to a complete stall. It sounded like I had run over...

My neighbor has a "98 B2150 with a loader for sale. He's asking $8500. Asumming good maintanance, can a machine like this last well beyond the 2000 hours this unit has on it? Thanks, Rusty

I know of a 1994 B2150 for sale. I haven't seen it up front but may later this week. I know the following details : 4 cyl diesel, 24 HP 4 WD loader turf tires cab approx. 2700 hours supposedly in very good condition they are asking $13,900 ( Canadian). Is this number of hours a concern ...

would like information on repair vs. replacement of the control for the front end loader. mine has worn seal(s) on the bucket roll and has no scooping power. the dealer has told me the only solution is to replace the entire unit. is this so?

My neighbor owns a B2150 with 3 range hydro and 540/748 PTO. When the clutch pedal is depressed, it sounds as if a clutch release bearing (or maybe flywheel pilot bearing) is is going out. It is a loud metal "ringing" type noise. As this has a hydro, would it have a single-stage clutch with a...

What is a fair price for this Kubota B2150? It is a hydo with four wheel drive? It comes as is from an auction as is with 5000 hours. The box blade comes with the tractor The battery is dead so I could not hear it run. What is the correct process to start tractor?

owning-ML-890978-ML- Kubota specific.

looks like a bearing in my b2150 alternator has seized. Is it possible to have the bearing replaced or should I just replace the whole thing? Any suggestions for where to get one for a reasonable price? It seems I read some time ago about an alternator upgrade. Anyone know if that's still...

Hello, New to this website but found it thru some recommendations of friends. I am looking to purchase a compact tractor. I am staying in the used market for now mainly because I don't want to take out a loan. I drove by a local dealer and he has a Kubota B2150 there with mid mount mower...

Anyone have an opinion on a price for a 1993 Kubota B2150 with a LA 350 loader and 6 foot back blade. This is a gear model about 450 hours everything works, light rusting. What would be a fair price, I'm checkiing it out this weekend.

B2150 Won\'t start I have a problem with my B2150 in that it will crank, but not start. I was running it and stopped for lunch. It has run fine for about 8 years with no problems. It has about 300 hrs on it. I went to start it after lunch and it would just crank. No smoke, no ignition , just...

Hello Members, My wife & I just purchased a home with 6 acres of pasture & mixed hardwood forest land. Gently sloping with gravel roads & no fencing yet. Our main use for the tractor is basic: > Gravel & Dirt movement > Road maintenance > work in our fruit tree orchard and in our blueberry...

We have a problem with our steering unit on our B2150. When you try to turn more than 15 degrees from straight ahead, the steering binds up. If you lift the wheels up and put them back down at full lock, you can easily take it back to center, but as soon as you get to the 15 degrees the other...

Hello there all! I am new of course and looking forward to learning a lot here! I bought a used B2150 in January and I find myself coveting a loader for it. I have looked at many: Koyker (which won't fit my tractor), Helpmate, Accutech, etc. Does anyone have experience with these loaders...

A friend is looking to buy a 4WD B2150HSD with a FEL. I don't know the production year or the S/N to look it up. It has 2335 hrs. and the asking price is $8500. The tractor appears to be in a fair to good condition. Take a look please. What do y'all think, good price? Thanks, bucky4

Looking at a used b2150 with hst 4cyl. Because of its age (91)I am concerned that I may not be able to buy a fel for it as it does not have one. Also was wondering if anyone can share their thoughts about the tractor? Is it a good strong dependable unit, or should I stay away? It has 950hrs on...

I would like to increase the headlight bulbs in my B2150 to 25 or 35 watt range, replacing the 12v 15/15w originals. The original bulbs seem to be a rare type and not easily located locally. Can someone please help me find this type bulb in the 25 watt range in either a Kubota part or other...

I found a Kubota B2150 with a 72" mid mower for $7,500. There doesn't appear to be any problems with it, is this a good price? Thanks Flymutt

are there specs for the b2150 onlinre anywhere? I'm most interested in hp (gross/pto), dimensions, and weight. Also, any idea on what it would cost to add a loader to one of these tractors?

Hello, all. New here. Having a bad time trying to get this posted. I hope I haven't screwed it up. My B2150 HST 4x4 with power steering gets hot over about 30 minutes when operating a 60" PTO finish mower (or any other implement I have) at creeping speed. Always has. Anyone else have this...

Have a steering box that needs rebuilt or replaced. No adjustment left and still toooo much play. Any one have experience in rebuilding the steering box....or is it not worth the effort??????

buykubota-ML-395981-ML- Please don't post brand-specific pricing questions in the general forums.

Would like your opinion what is a good price for this tractor: Kubota B2150HSD with Loader, 60 inch mid-mount mower, Bi-Steer and 900 hours. Seems to be in good condition. Orignial owner. I have an offer to buy this tractor for about $10,000. Thanks

I have a 2150 2 wheel drive, FEL, BH, box, rotary cutter. It has turf tires, and I was looking to get a set of r4 tires and rims, for better traction, and thinking to put liquid in the rears to add stability for some grading on 20% hill. Dealer here in Southeast VA says that he can not find...

I have a 1/4" hole in my rear turf tire for my B2150 4WD(calcium filled). I asked the repair facility to patch and tube. I was told that the inside of the tire has a 4" slice through the cords and that the patch/tube won't hold. Does this sound correct and if so what is the best price I can...

Hi, I am getting ready to purchase a rotary mower for my B2150 - just not sure what size to get - a 4' or 5'? I understand the advantages of a 5' as it will go past the rear tire width and allow me to mow close to fences and mow beyond the tires. My concern is that I live where it is very...

Well, I found a B2150 and was interested in buying it until I realized it does not have power steering. I was a bit surprised as I remember reading somewhere that B2150's with 4wd have power steering as a standard option. Anyway, does anyone have any idea on what is exactly needed to add this...

I am considering purchasing a 1997 B2150 with 450 hrs. The dealer is offering me a package deal with either a Woods 1006 or the Kubota LA350 loader. The LA350 will cost me $1000 more than the Woods 1006. I read several threads regarding Woods and OEM loaders and I understand the OEM...

Hi folks, I have a Kabota B2150 HST. The hand throttle, which has been stiff for some time, will not rotate to allow me to set an engine speed. It is stuck at idle although I can reach down and hand operate the linkage that goes to the engine. The linkage system looks very simple with a rod...

Saw a 1999 B2150 hydro with fel and scraper for 11,800...is that fair price?....it's got about 260 hrs. -s-

I've been looking into the bx22, but am concerned that it might not have the weight and power to handle some of the jobs I've got lined up, including some riprap work, trenching in rocky soil, stump removal, etc. I can't afford a larger tractor, fel, backhoe new, so... as a possible...

I'm thinking that someone must have done this already and could give me some pointers? I have a 1992 B2150DT with a factory loader. I got an email from TractorSmart when I asked about a rear hydraulic kit that suggests the loader has taken the only available hydraulic outlet on the tractor...

Well, although I have not been active on the forum for a while I have been working with the tractor. I took these photos and have been meaning to post them for some time now but have only just got round to it. This first photo shows the backhoe uprooting Bog Myrtle. I have tied rope around the...

The mower lifting mechanism on my B2150 needs adjusted every year. Each spring, when I mount the mower (RC-72B), I have to adjust the turnbuckles to get the mower back up to the bumper blocks. As the year progresses, the gap between the mower and the bumper bocks grows from the 1/16" I set it...

I recently bought a 1992 B2150 with 4wd, a LA350 FEL and 6 ft. Woods backhoe. Condition is good, 825 hrs.,9 speed gear transmission (I wish it were hydro.). Is $12,500 a fair price? Also, how do I center the steering wheel? I removed the nut in the center, but could not get the wheel off.

The manual for my b2150 says that to engage cruise control you stay in low or mid range, move the small lever below the steering wheel to “on”, have the machine traveling at the desired speed, then engage the cruise with the long lever to the left of the steering wheel. When I try this the long...

Does anyone have rear remotes on their Kubota B2150? Does anyone know what parts are required?

I took the loader (la350a) off the machine for the first time this weekend. Never thought to check to see if the Color-coding on the hydraulic hoses had a matching color on the valve. When I went to reattach the loader and connect the hoses I found no color codes on the valve. Can anyone tell me...

I have purchased a 4690 Backhoe ($4000) for use on my B2150 with a front end loader. In addition, I have just bought the upper bracket that those on this forum advised me to do. But ......., I'm curious to know if anyone else has the same combination of tractor/backhoe and if there are any...

Has anyone else out there had problems with leaking front axle seals. This tractor is a B2150 HST 4wheel drive. The seals leak right at the Steering Gear Box junction?? Replaced the left side with 510 hours and now the right side 50 hours later.

I finally got round to taking some photos of my recent purchase. Picture didn't upload...will try again!

Well I finally did it. Yesterday I took delivery of my first toy after 2 years of lurking within this group. It’s a 1998 b2150HSD with a LA350 loader, 6’ landpride blade, and 10 hours on the clock (yes 10 hours, the dimples are still on the tires and the loader is hardly scratched) that I bought...

Comments please. I just purchased a used B2150 for $11,000 with LA350 loader & 72" belly mower. 1995 with 423 hours. Did I do well or is this about the right price? It's really clean, probably kept inside. Thanks for all replies

Help please guys! This may seem a very strange post . On Saturday my B2150 HST FEL/BH will be arriving , as you will know from my previous posts I have not seen it yet. I also have never driven a tractor - apart from moving one a few yards. I ordered an operators manual from the local Kubota...

I have found out the serial number of my - soon to arrive - B2150. Can anyone tell me what year it is please? I don't know if it makes any difference but it is the UK market. The number is 52489. Should be arriving Saturday . Regards

New to tractors. Given price of $17,000 on 1993 B2150 Kubota 4WD loader/backhoe combo. 249hrs. Ag-Tires. Machine in like new condition. To much or in the right price range? Thanks in advance...

What would be a good price on a tractor with the follow characteristics: B2150, 4x4, Hydrostatic, 163hr., Garage Kept, with Befco 5’ finish mower and Woods 5’ Blade. Don’t know the type of tires or the Befco model yet. Any ideas?

I am trying to find out a price for transporting a B2150 with FEL and backhoe. I know roughly the weight of the tractor but not with the attachments, anyone any ideas please? Thanks in advance

Does anyone know the front to rear wieght distribution of a B2150 hydro 4x4? Thanks

I have spoken to a non-franchised dealer about a Kubota B2150 tractor. It is 4 wheel drive, hydro trans, with a FEL and backhoe, it has 1000 hours on it and is in good condition. As the dealer is over 500 miles away it is very difficult for me to go and see it. He did say that if I bought it...

Is there anyone who has experience of both machines who can give an unbiased opinion. I have been on the lookout for a Kubota b2150 for some time (there are two dealers nearby). I have been offered several JD 855's in good condition (no dealer for 100+ miles). I should point out that they are...

I'm about to change the fluid in the hydrostatic transmission of my B2150. I have never done this before, so I studied the manual pretty carefully. My only concern is the size of my drain pan. There are two drain plugs in the bottom the case. My guess is that opening either one will drain...

Quality Farm & Fleet has 10% off all purchases the next three days. Therefore, I can purchase a King Kutter 60" Tiller for $979 less 10%....which is a geat deal. However, after reading extensively in this site I get the impression a 60" tiller may be too much for a B2150 HSD 4x4 with only 18HP...

Hello, I need to buy a 3pt plow to turnover the compost/leaves etc.. on my garden next spring before rototilling. What size plow works well with a B2150 HST w/ Turf tires? The tires are loaded and I have a FEL. The soil is sandy. The owners manual recommends a single 14" or a 2 x 12" plow. What...

The situation that I am about to describe is like finding a brand new 1998 automobile or truck on the lot in late 2001; how much of a price reduction would make it a good deal? Note that this discussion is mainly for academic purposes only; I already have a B2150 and wouldn’t mind upgrading my...

I have a 1996 B-2150 HSD with 300 hours. The owners manual says to replace the hydraulic hoses every 2-3 years (cannot remember the exact time frame). Do they really need to be replaced that often? Should they only be replaced if they are severly worn (from rubbing together)...or do they wear...

New here, wondering if this sounds like a good deal or not. I don't really "need" the backhoe right now... but I'm sure I could find some use for it. Any responses would be appreciated. Thanks

Does anyone know the proper (Best/easiet) way to adjust the brake pedal on a B2150? Actually the parking lever. The brakes work OK when I step on the brakes, but when I set the brake lever to park it, it isn't applying enough pressure on the brake to keep in from rolling. How can I adjust the...

I noticed today in my local equipment trader someone has both the B9200 and B2150 for sale. Each for $3900. The B2150 is a hydrostat, the B9200 needs a clutch. No mowing deck on either one, do they have 3 pt and rear PTO? I think I would rather have a rear mowing device anyway. I am realitively...

newbie ?\'s on a B2150 I just purchased a B2150D (gear-shift 4WD) w/FEL and 5' finish mower. Where can I get a swinging drawbar (besides a dealer)? Also I need turf tires real bad. I know what sizes I need, but where's a good place to get them? I have two more questions, but will start them in...

I have a 1994 B2150HST. I have been using a Kubota filter, part #70000-15241. Stopped by the local dealer whose parts man has quit. I was given a filter which is a bit larger, part # 15241-32093. (Didn't notice till I took old filter off.) Looked in my parts list and found a 15241-3209 that...

Hi, I have a B2150 with a LA350A loader and have noticed if I park the tractor with the loader raised up off the ground a foot or so, that after a period of time the loader drops down to the ground. It might take 4 hours or so, but it drops. I feel that there might be some sort of "leak" in a...

I wonder if anybody knows what tyre sizes (Turf and Agri) were specified for older B2150s. I ask because our new B2150 bought last spring has turf tyres which seem larger than I remembered from using B2150s a few years ago. The agri tyres seem about right and 4wd/bi-speed turn is OK without...

Hi and a happy upcoming new year to all. I've a line on a used B2150HSD (oh how the requisite size of my toy has grown) w/ the Kubota 60" belly mower and LA350 FEL for just under $12k. 400 hours, one owner, stored indoors. Looks good from the pictures so seems like a pretty reasonable price...

The steering on my B 2150 has suddenly loosened up to the point where there is 3-4" of free play. The arm coming out of the steering box responds to small movements of the wheel but barely moves. Also the steering column seems to have come loose so that it can be wiggled around a bit. I tried...

Seems that the peddle that controls f&R movement on my B 2150 does not fully return to neutral when you remove your foot. I have to give it a little rearward nudge to fully stop forward travel. Any ideas? Thanks

I'm looking at buying a used B2150 HSD. What size bush hog, rake, box blade, tiller, and grader blade will this tractor handle?

Heres the deal I've been offered: 97 B2150 Hydro with loader, 450 hours, turf tires, $10,000.00. Now the bad news, its a rental unit. Is this a good price?

Can someone tell me the intake and exhaust valve clearances on my b2150 . thanks

Goodbye ol\' B2150 Took the plunge and bought a new B2910 with loader Saturday. It will be coming Tuesday afternoon. I have had a B2150 with a loader for the past 5 years and have loved it. Even with my love of the Kubota I still shopped everything else for the past few months and really...

Please help! Please don't laugh! I' afraid they do not make tractors women friendly. I am trying to check the oil on a B2150 and can not find the dip stick. Please help me locate it. Thanks for your help.

I have reasonably steep slopes on my property and prefer using the seat belt. On my B2150, I put the seat belt on an tighten it up only to have it loosen itself completely in less than 5 to 10 minutes, depending on what I'm doing. The belts visually appear to be in excellent condition. Has...

Has anyone tried relocating the exhaust stack on the 2150? I have a lot of dogwoods with low branches that tend to get caught by the exhaust pipe and then whip me in the face as I continue. Not a very pleasant experience. I could deal with them brushing by my face, but the whipping has gotten...