Need input on a welder for a newbie

   / Need input on a welder for a newbie
  • Thread Starter
#21  
Good to know. I doubt I'll be wanting to work with anything heavier than that.
 
   / Need input on a welder for a newbie #22  
Rural king has a 140 amp welder, 4500 Watt generator for $1600

GW450001AC

No personal experience with it though

Northern tool has a 170 amp DC arc welder; 7000/6000 Watt generator for $1500. With wheels.

No experience with it either.
 
Last edited:
   / Need input on a welder for a newbie #24  
Just make absolutely sure you don't overfill the fuel tank on the Hobart or the carb. can flood and cause the rings not to seat. Not covered by warranty. The Champion is most likely the same as a Miller Bobcat.
 
   / Need input on a welder for a newbie #25  
Thanks for the heads up. I don't understand how that can happen.
 
   / Need input on a welder for a newbie #26  
Non vented fuel cap and the fuel runs back down the vent line instead of venting or something along those lines. It happened on my friends Lincoln and the shop had 8 other's that had the same problem.
 

Tractor & Equipment Auctions

(1) HD 20ft Free Standing Corral Panel (A57453)
(1) HD 20ft Free...
2015 Kenworth T880 QMC 8060R 50 Ton Tri Axle Crane Truck (A60460)
2015 Kenworth T880...
New/Unused 110V Diesel Pump with 50ft Hose (A57454)
New/Unused 110V...
2013 International PayStar 5900i Heavy Haul Truck, VIN # 1HSXYSJT8DJ321464 (A57453)
2013 International...
2001 Chevrolet Silverado Flatbed Truck, VIN # 1GBJK34131E284932 (A57453)
2001 Chevrolet...
2018 CON-WAY DOLLY (A59575)
2018 CON-WAY DOLLY...
 
Top