New 2320

[jdpotter]

Took delivery on a new 2320 last Friday. The info in many discussion threads was invaluable as I tried to decide between the 2305, 2320, and Kubota 7610

Main reasons I went with 2320 were ground clearance, foldable rops, and position control. I have both a JD & Kubota dealer within 5 miles, but I had good prior experience with the JD dealer, and my initial impressions of the Kubota dealer was that he thought he was doing me a favor to talk to me.
Pricing of the 2320 & 7610 was about the same.

Attachments are 200CX FEL, Frontier 48" Rotary Cutter, 54"D MMM, I-Match Hitch. Paid $17,600 plus tax.

Will use to rough cut 10 acres of field with some hills, and wet spots, and 1.5 acres of lawn, plus moving firewood, mulch, etc.

Previously I had a JD L180 for cutting the lawn and I rented equipment to cut the field.

Thanks again to all for your advice.

 

[Chris2520]

Welcome to the forum.
I just know your going to really enjoy it.
thats a nice looking set up.

Chris....

 

[jcmseven]

JD,

Welcome to the forum. I would like to say I do not like your 2320 at all. I would strongly suggest you contact me immediately and turn it in to me. I will dispose of it properly for you, which means put it in my garage. I will not keep you posted of its whereabouts. I promise you I will turn it back in for you. It might have a few thousand hours on it before doing so, but since you will no longer have it, it will not matter. It's for your own good.

John M

 

[EdC]

JD

Congratulations and welcome, nice looking rig. Let us know what you think of the Frontier rotary cutter, that may be on my next springs gotta get list. You will find new uses for your tractor all the time.

 

[pkav32]

Looks great! The rotary cutter is my next purchase, let us know what you think! Congratulations on the right choice.

 

[unreconstructed]

I will have to throw in my congrats in also. You will like the little fella.

I have used mine on my lawn--the dealer forgot to fill the tires like I asked him but it has worked out--I take off the ballast box when I get on the grass and it worked out well. Pretty versatile piece of equipment in my view.

Have fun!!!!

 

[cast_and_blast]

Congrats and welcome!!

 

[Skipholiday]

Sweet looking setup. Congrats..

 

[Shawk]

Took delivery on a new 2320 last Friday. The info in many discussion threads was invaluable as I tried to decide between the 2305, 2320, and Kubota 7610

Main reasons I went with 2320 were ground clearance, foldable rops, and position control. I have both a JD & Kubota dealer within 5 miles, but I had good prior experience with the JD dealer, and my initial impressions of the Kubota dealer was that he thought he was doing me a favor to talk to me.
Pricing of the 2320 & 7610 was about the same.

Attachments are 200CX FEL, Frontier 48" Rotary Cutter, 54"D MMM, I-Match Hitch. Paid $17,600 plus tax.

Will use to rough cut 10 acres of field with some hills, and wet spots, and 1.5 acres of lawn, plus moving firewood, mulch, etc.

Previously I had a JD L180 for cutting the lawn and I rented equipment to cut the field.

Thanks again to all for your advice.

Great choice in color? Was there an upcharge?

Welcome.... & congrats on your new machine...

 

[gunmaker]

Nice looking unit, especially in green! Good luck with her.

 

[Roadkill95]

Took delivery on a new 2320 last Friday. The info in many discussion threads was invaluable as I tried to decide between the 2305, 2320, and Kubota 7610

Main reasons I went with 2320 were ground clearance, foldable rops, and position control. I have both a JD & Kubota dealer within 5 miles, but I had good prior experience with the JD dealer, and my initial impressions of the Kubota dealer was that he thought he was doing me a favor to talk to me.
Pricing of the 2320 & 7610 was about the same.

Attachments are 200CX FEL, Frontier 48" Rotary Cutter, 54"D MMM, I-Match Hitch. Paid $17,600 plus tax.

Will use to rough cut 10 acres of field with some hills, and wet spots, and 1.5 acres of lawn, plus moving firewood, mulch, etc.

Previously I had a JD L180 for cutting the lawn and I rented equipment to cut the field.

Thanks again to all for your advice.

Whats that rotary cutter worth I"m just tryiny to figure what the cost would be without it
Thats what I'm looking for W/O the rotary cutter

 

[pkav32]

Roadkill,
Here is just a reference for the frontier rc1048. This link has a package price and a list price. This site should give you an idea of where you are with $$.

Frontier Equipment

It gives a bunch of different attachments from frontier and Deere.

JdPotter, welcome to the forum. I am also new and I enjoy looking everyday to learn something new.

 

[Nuru]

Congrats on the new unit. Have fun!

 

[RalphVa]

Congratulations. I pretty much did a similar look, at 2210, 4010, BX, B and chose the 4010 for similar reasons to yours.

Wish my 4010 had position control on the 3ph.

Ralph