OP
RexB
Gold Member
No problem, inspecting or diagnosing cylinder parts cross-country is next to impossible.
New boom cylinder fixed the droopsies..
- Thread starter RexB
- Start date
- Views: 7152
JoelD
Veteran Member
- Joined
- Jan 27, 2005
- Messages
- 2,343
- Location
- Windham, NH and York, ME
- Tractor
- Kioti LK3054xs TLB, 2004
Great job on tear down, always nice to get the first time behind you. Always feels good to figure stuff out. Looks like this post ended up being a whole lot more popular than you first thought. Also good to know you don't have anything floating around in the hydro system.
Great Work.
Great Work.
OP
RexB
Gold Member
Thanks JoelD, a cylinder looks "sort of" friendly and easy enough once its apart, but the best part was putting it back together and on the spares shelf, lol.
UPDate, I'm late! The new boom cylinder also digs a little harder -- I ran into a couple of hard cedar stumps and now the backhoe digs and cuts roots better. Apparently no more seepage around O-ring(s)...The boom does not drop down under extreme pressure now until the safety bypass valve kicks in.
Mo' betta' !
ps: this boom cylinder bar code label said "KB2385" and was the same dimensions as the old boom cylinder off my KB2375 hoe.
UPDate, I'm late! The new boom cylinder also digs a little harder -- I ran into a couple of hard cedar stumps and now the backhoe digs and cuts roots better. Apparently no more seepage around O-ring(s)...The boom does not drop down under extreme pressure now until the safety bypass valve kicks in.
Mo' betta' !
ps: this boom cylinder bar code label said "KB2385" and was the same dimensions as the old boom cylinder off my KB2375 hoe.
