OP
New log splitter control valve.
- Thread starter melvinhatcher
- Start date
- Views: 14072
LD1
Epic Contributor
Switch the ports like the pic in wranglerx's post.
Make sure pressure is the port and the return is the T port. Might take a bit more hose to make the return the top port. But looks like an easy fix
Make sure pressure is the port and the return is the T port. Might take a bit more hose to make the return the top port. But looks like an easy fix
OP
melvinhatcher
Bronze Member
OP
melvinhatcher
Bronze Member
Yes sir the ram directions are correct now removing and replacing the valve like the valve on your Duerr splitter.
My problem now is; the old valve handle may have wrong shape to complete the cycle.
My problem now is; the old valve handle may have wrong shape to complete the cycle.
WranglerX
Super Member
Don't understand that message .... What do you mean by wrong shape.... Pictures would help.....
OP
melvinhatcher
Bronze Member
I’m trying to figure, how to post a video of what I am talking about.
WranglerX
Super Member
Simple picture with explanation would help....
triptester
Silver Member
The valves pictured in previous posts differ as to the work port functions.
On the Energy style valves the work port nearest the handle controls the retract of the cylinder.
On the Prince style valves the work port nearest the handle controls the extend of the cylinder.
On the Energy style valves the work port nearest the handle controls the retract of the cylinder.
On the Prince style valves the work port nearest the handle controls the extend of the cylinder.
OP
