New to the Group - Considering YM336

   / New to the Group - Considering YM336
  • Thread Starter
#51  
took about 2/3rds of the gallon to fill. Hope it wasn't driven in 4WD much (doubt it actually). :D
 
   / New to the Group - Considering YM336 #52  
took about 2/3rds of the gallon to fill. Hope it wasn't driven in 4WD much (doubt it actually). :D

It holds about 7 or 8 qts so it was ok not ideal but all the parts that need lubed would have been enough at 1/2 full.

You are ok dont even give it a second thought a leak may crop up now its topped off and explain it ;) and it sounds like the rest was taken good care of you are fortunate to have found a 30 year old machine in that good of condition great find! :thumbsup:
 
   / New to the Group - Considering YM336 #53  
Check the level for a couple of days. It takes a long time for the gear oil to settle in. Did on my 276D anyhow.
 
   / New to the Group - Considering YM336
  • Thread Starter
#55  
Ditto on my ym2002d.

Hey Guys!......... No drips on the concrete this morning! (still have to re-check the level). :thumbsup:
 

Tractor & Equipment Auctions

2009 Skeeter SL190 19ft Boat with 21ft Boat Trailer (A51694)
2009 Skeeter SL190...
FECON SKID STEER QUICK ATTACH HYD MULCHING HEAD (A51406)
FECON SKID STEER...
2016 Tesla Model S 85D Long Range AWD Sedan (A51694)
2016 Tesla Model S...
1972 Baker 30ft Pole S/A Towable Trailer (A51692)
1972 Baker 30ft...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A53472)
80in HD Tooth...
2015 KOMATSU PC35 MR-3 EXCAVATOR (A51246)
2015 KOMATSU PC35...
 
Top