OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
Out with the old! In with the new!
- Thread starter crazylare1
- Start date
- Views: 3741
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
well guys thanks to Bloomingtonmike the photos are downloaded, there will be more photos coming when the rest of the stuff is put onto the tractor and it's re-delivered in the near future, but now i've got to get all the honey do's done so that i can go play in the dirt. the day is gettting short, and the time is going by fast. thanks for the interest! lar
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,556
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I'm willing to bet you will really enjoy the new tractor, and when you want to drop the FEL, it will be a whole lot better than removing the FEL on the Ford. Hope you don't miss the smaller bucket size, but expect you will soon get over that.
I check the bolts and nuts for tightness, and I put marks on the wheel bolts that I can check occasionally for any tendancy to move and back out.
Enjoy the fun. /forums/images/graemlins/wink.gif
I check the bolts and nuts for tightness, and I put marks on the wheel bolts that I can check occasionally for any tendancy to move and back out.
Enjoy the fun. /forums/images/graemlins/wink.gif
OP
crazylare1
Silver Member
- Joined
- Nov 21, 2005
- Messages
- 158
- Location
- Stanwood, MI
- Tractor
- JD 3320, JD GT235, JD 116, JD 57, an several other makes of lawntractors somewhere around 8 of them
belive it or not i got the new tractor late thursday afternoon, it was snowing out so i took a few pic's, ran it into the garage so it wouldn't get wet, (the seat) then i had to do some other things, and when i looked outside it was dark,,,,oh well tomorrow, then friday i had to cut and split firewood, put chains on the old wood truck, etc. and before i knew it the day was gone. now it's sat. and i've been told that some things need to be done today (really they do, she's not that demanding, just pointing out things that i can't seem to remember on my own), so maybe after that i can get some time on the tractor. one thing is, during the shootout that i had here between the case and deere, i got several hours of run time on the deere, so since this one is the same w/ 3 extra hp, it won't kill me too much to get the other stuff done first i guess. i'll keep an eye on the nuts and bolts, i already looked it over with a fine toothed comb, and was dissappointed to find lots of nicks, an marrs on the paint, spent about 1 1/4 hrs touching up the paint, can't stand having rust or gouges on it. if you look at my old 197? ford you will notice how fussy i am. well gotta get to work, thanks for the nut and bolt tips. lar