PEC revised instructions, diagrams, pics please.

[Tractorganic]

So where do I turn for the new improved Pat's Easy Change instructions, diagrams and pictures? Following the thread sends me into internet limbo. I bought this thing in Aug, '06 but wasn't able to use it with my Farmi winch as the PTO shaft was too short. Since then I replaced the shaft with a new longer one. My knees are getting too bad to jump on and off the tractor any more than neccesary so I'm giving the PEC another try but I still have the ancient instructions! I particularly need help on the side shims.

 

[Inspector507]

Email Pat at the address at the bottom of his website here.

 

[PATG]

tractorganic,

Here is the link to the instructions. New Page 2

If you need any further assistance just call us at 888-243-4204.

 

[Tractorganic]

Thank you. The link was helpful. As best I can tell there are no side shims and all vertical alignment is done w./ the set screws. I'll just use the shims for bottom leveling.
My major concerns w./ the TBN/PEC site are the references to 'click for more info' in several places that dump me back to the discussions or worse, to an error page, or warning that the site I'm being segwayed is suspicious and please check the box if you really want to go there but then you get the error page anyway.
This may not be helpful for sales.