We live on high bank waterfront and have to maintain the bank in front on a regular basis. Today I helped my neighbor clear his bank. We have alders that grow like weeds. If they are not cut down on a regular basis, they will work the bank in the windstorms and eventually cause serious erosion, not to mention that they eventually will block the view if we don't clear them. BT....( <font color="blue"> B </font>efore <font color="blue"> T </font>ractor) /forums/images/graemlins/frown.gif We used to drop them on the beach and spend all day (at least) burning and getting rid of the limbs and branches. Now that I have a tractor, I can get down to the beach, haul them up and run them through my chipper. Green alder makes great mulch/compost. So, today's project took about 2 hours, instead of 2 days. Here is a picture of the "cut" that we use for access to the beach.
Here is my exotic set up. Total investment..... about a buck and a half. /forums/images/graemlins/smile.gif Scrap 4x4's, plywood gussets and a couple of bolts through my toothbar holes.
Thought I'd share.... This sure makes my life easier..
</font><font color="blue" class="small">( If they are not cut down on a regular basis, they will work the bank in the windstorms and eventually cause serious erosion )</font>
I always thought vegetation of some sort was good to prevent erosion, but I assume wind rocking a tree can loosen the soil around the roots? At any rate, nice looking forks for hauling the brush.
Bird,
That is a common misconception around here. The roots prevent erosion, but if the tree gets tall enough, during our wind storms it will have so much leverage it actually works the roots loose and can take a significant chunk of dirt with them as they slide down to the beach. The bank is nearly vertical, so these trees are barely hanging on as it is. We also can get some pretty incredible wind storms. I never disturb the roots or the low lying vegetation. Anything short helps keep the bank stable. In general, we drop anything taller than 20 feet. (I think these alders grow about 10 ft/year /forums/images/graemlins/crazy.gif) In some cases, if the trees fall up hill, I leave them, because they provide more stability for the natural vines, etc. as they rot.
Hey, I love "field expediency". It separates the blister bait from the smart workers. I can tell just at a glance that it works just great.
I made a ghetto fork/ramps for my mower out of 2x6's. I got tired of slithering under my 42" riding mower to sharpen or change blades and to chip the dried grass out from under the deck. Now I just drive the mower on, lift the front loader and mower all up to a comfy working height. It's a poor man's lift, actually. Arent FEL's great?
</font><font color="blue" class="small">( Bird,
That is a common misconception around here. The roots prevent erosion, but if the tree gets tall enough, during our wind storms it will have so much leverage it actually works the roots loose and can take a significant chunk of dirt with them Greg )</font>
They also shade out the grass and lower vegitation, which does prevent erosion.
I was thinking of this thread and how what you made was more like bucket forks than a grapple...and so I snapped a picture of my "poor man's grapple" (after using it quite a bit yesterday) ... /forums/images/graemlins/smile.gif
I don't know. /forums/images/graemlins/confused.gif
That "grapple" looks awfully clean to me. I don't see any nicks, dings, or scratches.
Might this just be a "show" grapple? /forums/images/graemlins/smirk.gif The real working grapple is out resting in the barn? /forums/images/graemlins/shocked.gif /forums/images/graemlins/grin.gif
<font color="blue"> Henro why don't you sell me your graple.</font>
Can't do that...my grapple is priceless... /forums/images/graemlins/smile.gif
As a matter of fact(golfgar4), I usually cover it with a protective cover when in use...and wash it after use as well... /forums/images/graemlins/smile.gif
