Quick Attach for subcompact tractors

jmainel1 · Mar 31, 2011

Anyone know of anyone who makes a quick attach setup for a Massey Ferguson GC2310TLB or similar?

TractorEnvy · Dec 12, 2013

jmainel1 said:
Anyone know of anyone who makes a quick attach setup for a Massey Ferguson GC2310TLB or similar?

Have the same question regarding my GC2410 and disappointed to see that no one every replied to your post! Wondering if you ever found a quick attach for your tractor?

Deerherd · Dec 12, 2013

If you are talking about a quick attach for your FEL, WR Long makes them. Here is a link to the page and if you scroll down to the bottom there is a link to a work sheet for measurements. Or you could call them and see if they have done one for your tractor.

Adaptor Plate

EverythingAttachments · Dec 13, 2013

We offer the WR Long Quick Attach Adapters.
They have both the 2350 and DL100 loader drawings on file.
Travis

TractorEnvy · Dec 14, 2013

Dave & Travis, thanks for your replies! I had looked at the WR Long Adapter but wasn't quite sure it would fit my loaders arms as I couldn't find any info specific to the GC2410 on their website. Good to know they make an adapter which should fit. Now to consider the details....

Obviously the GC2410 has limited FEL lift capacity already so I don't want to add anything too heavy. Quoting from the WR Long website description of the adapter plate, "...average weight is approximately 130 pounds".

@Travis, do you know the weight of the adapter designed for the DL100 loader? I looked at the link you sent and watched Ted's video but there are no specs listed. I assume that's because the adaptor specs are different for each loader.

EverythingAttachments · Dec 16, 2013

According to WR Long, the adapter for a DL100 will weigh really close to 110 pounds.
I hope this helps.
Travis

msb1766 · Dec 16, 2013

I am been thinking about getting is system:
TACH-N-GO QUICK ATTACH

jim_wilson · Dec 16, 2013

msb1766 said:
I am been thinking about getting is system:
TACH-N-GO QUICK ATTACH

Give them a call - Jery is a great guy to deal with. He's worked up a setup so I can use his grapple arrangement on my B3200 - and it cam out great.

Now I just have to find the time to install it.

jim_wilson · Dec 16, 2013

EverythingAttachments said:
According to WR Long, the adapter for a DL100 will weigh really close to 110 pounds.
I hope this helps.
Travis

I looked at that WR Long stuff back when I had my BX23 - and it weighed in heavy. I wouldn't want to add that much extra weight to the FEL - it would seriously impact the lift capacity on that sub-compact tractor.

grsthegreat · Dec 16, 2013

try Skid Steer Attachments | Mini Skid Steer Attachments | Tractor Attachments | Bobcat Attachments | Quick Attach

or try

Tractor Front End Loader to Quick Attach Converters Attach All

they sell alot of retrofit models. you can call and ask them also

1-866-428-8224

TractorEnvy · Dec 16, 2013

Looks like the Tach-n-Go might be a good option for my small tractor. Sent Jery a message to get a few more details. Thanks for all the suggestions!

Arcstriker29 · Jan 22, 2019

TractorEnvy said:
Looks like the Tach-n-Go might be a good option for my small tractor. Sent Jery a message to get a few more details. Thanks for all the suggestions!

Did you ever get the Tach N Go set up? if so, how do you like it? and how much did it cost? I've been looking for something for my GC2410 with the DL100 FEL and I like this set up better than the standard Skid Steer Quick Attach. I only use my bucket and another attachment I made to raise and lower my snow plow (an older 7.5' plow for a truck) and I also use a reese hitch for moving trailers around the yard, so this Tach N Go looks like it would work great for what I need. Thanks.

11B2620 · Feb 3, 2019

I have a subcompact kubota bx2200. I used the titan quick attach weld on kit. Cut the back of the bucket off leaving the pins and everything alone. Then used a 3 inch piece of square tubing for a spacer between the back of the bucket and the titan quick attach setup. Then you have to weld on a plate on the bucket. I used the quick attach plate from titan. I have pictures I showed on another post regarding the same thing. If you can't find it let me know I will post them on this post. I will try to answer any questions you might have as well.

Xfaxman · Feb 4, 2019

11B2620 said:
----------------------------
I have pictures I showed on another post regarding the same thing. If you can't find it let me know I will post them on this post. I will try to answer any questions you might have as well[/B].

It is easier to post a link to your other thread: https://www.tractorbynet.com/forums...verting-quick-attach-michigan.html?highlight=

11B2620 · Feb 4, 2019

Okay okay haha! Give this a try and see if it works. Shows the pictures converting my subcompact to quick attach.

https://www.tractorbynet.com/forums/attachments/407928-kubota-6315-quick-attach-bx2200.html

atsah · Feb 4, 2019

My "Worksaver" SSQA is a nice unit on my GC, I paid $600.00 for it..

civilian · Feb 4, 2019

Arcstriker29 said:
Did you ever get the Tach N Go set up? if so, how do you like it? and how much did it cost? I've been looking for something for my GC2410 with the DL100 FEL and I like this set up better than the standard Skid Steer Quick Attach. I only use my bucket and another attachment I made to raise and lower my snow plow (an older 7.5' plow for a truck) and I also use a reese hitch for moving trailers around the yard, so this Tach N Go looks like it would work great for what I need. Thanks.

Yes I have Jery Dunn's Tach-N-Go system on my BX2230 and his fixed forks. Doesn't weigh a lot and works great. Jon