goeduck
Super Member
Turns 90 degrees and displays correctly when I open it.
Removing saplings up to 2" in diameter
- Thread starter shooterdon
- Start date
- Views: 35043
Turns 90 degrees and displays correctly when I open it.
OP
shooterdon
Elite Member
- Joined
- Nov 24, 2012
- Messages
- 3,587
- Tractor
- 2019 LS XR4140 HST Cab; 2020 Kawasaki Mule SX; 2021 Bad Boy 54" ZT Elite
Wish I had a few of those.....
Looks like you used a tree puller....what kind do you have?
Diggin It
Super Star Member
Lots of different devices and ideas here including many the OP stated they don't want to use because of the spikes left behind.
But one from some other threads comes to mind. One of those two part FEL buckets (can't remember what they're called now -- 4 way?) Half of the bucket opens like a giant jaw; sort of like a bucket and grapple combined.. Open it, grab some of the saplings, close it and lift. With sufficient lifting capacity and soft, damp ground, it might work well.
But one from some other threads comes to mind. One of those two part FEL buckets (can't remember what they're called now -- 4 way?) Half of the bucket opens like a giant jaw; sort of like a bucket and grapple combined.. Open it, grab some of the saplings, close it and lift. With sufficient lifting capacity and soft, damp ground, it might work well.
SilveradoBrian
New member
Yeah, normally I wouldn't pull a walnut, but it was in a fencerow.
It's a Titan TTP13.
rangerfredbob
Veteran Member
I have a 10' long 5/16" or 3/8" chain with slip hooks on both ends, use it as a choker and hook the other end to something sturdy on the tractor... I've pulled 30+ grape plants with it and a 1" scotch broom or 3 so it's pretty versatile... when some of the grape plants broke off 3" off the ground I was able to grab what was left and get it once I got the chain low enough...
