(Resolved) Branson 2400 diff lock pedal assembly

[kw00]

Broke this tractor down to replace a broken gear in the manual gearbox. Unfortunately I didn't take many photos since the manual appeared to have photos at every step. Oops... the photos showing the differential lock pedal connections are of a 2510, and I can't seem to make it match up. The rod is straight and I can't get a straight path between the pedal hole and the diff lock actuator. The pedal is a couple of inches too far in. The parts drawings are the correct model but perhaps too abstract to help. Does anyone have photos of this area of the tractor?

 

[kw00]

Never mind! After further work I figured out the rod is slightly angled. I figured if I posted it might solve itself.