rim question
- Thread starter fsteyer
- Start date
- Views: 3079
RollTideRam
Veteran Member
Wheel weights, tire chains, front weights, better tires. Those are some suggestions. JC
RollTideRam
Veteran Member
Wheel weights, tire chains, front weights, better tires. Those are some suggestions. JC
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
My guess is that the 4 holes inthe center are for mounting weights, and the 4 tabs around the edge are for flippin the rim, and changine sides.. to make it wider.. check to see wher ethe rim is mounted to the center.. if there are 4 tabs that look similar.. you have your answer.
Soundguy
Soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
My guess is that the 4 holes inthe center are for mounting weights, and the 4 tabs around the edge are for flippin the rim, and changine sides.. to make it wider.. check to see wher ethe rim is mounted to the center.. if there are 4 tabs that look similar.. you have your answer.
Soundguy
Soundguy
</font><font color="blue" class="small">( My guess is that the 4 holes inthe center are for mounting weights, and the 4 tabs around the edge are for flippin the rim, and changine sides.. to make it wider.. check to see wher ethe rim is mounted to the center.. if there are 4 tabs that look similar.. you have your answer.
Soundguy )</font>
thanks Soundguy ... I understand you on flipping the tires to make it wider for stability. But what would that have to do with the tabs?
Thanks
Soundguy )</font>
thanks Soundguy ... I understand you on flipping the tires to make it wider for stability. But what would that have to do with the tabs?
Thanks
</font><font color="blue" class="small">( My guess is that the 4 holes inthe center are for mounting weights, and the 4 tabs around the edge are for flippin the rim, and changine sides.. to make it wider.. check to see wher ethe rim is mounted to the center.. if there are 4 tabs that look similar.. you have your answer.
Soundguy )</font>
thanks Soundguy ... I understand you on flipping the tires to make it wider for stability. But what would that have to do with the tabs?
Thanks
Soundguy )</font>
thanks Soundguy ... I understand you on flipping the tires to make it wider for stability. But what would that have to do with the tabs?
Thanks
Cord
Veteran Member
Some tractors have a rim center that can be unbolted. The rim center is then flipped over and/or wheel is flipped to create different combinations of back set. That said, I don't think you tractor would utilize them for changing the backset.
Try adding liquid and/or iron weights to your tires. The weight will make a big difference.
Try adding liquid and/or iron weights to your tires. The weight will make a big difference.
Cord
Veteran Member
Some tractors have a rim center that can be unbolted. The rim center is then flipped over and/or wheel is flipped to create different combinations of back set. That said, I don't think you tractor would utilize them for changing the backset.
Try adding liquid and/or iron weights to your tires. The weight will make a big difference.
Try adding liquid and/or iron weights to your tires. The weight will make a big difference.
