OP
1948berg
Gold Member
- Joined
- Feb 3, 2006
- Messages
- 410
- Location
- Southern Norway
- Tractor
- A Fergie-MF 35 gas- Mf 165- Mf 6161- Unimog- Fiat 880
Sawmill
- Thread starter 1948berg
- Start date
- Views: 3891
OP
1948berg
Gold Member
- Joined
- Feb 3, 2006
- Messages
- 410
- Location
- Southern Norway
- Tractor
- A Fergie-MF 35 gas- Mf 165- Mf 6161- Unimog- Fiat 880
MotorSeven
Elite Member
Ok guys,
I went over there and they have a forum that guests can type in on. Their moderator sent me an em and is seting me up with registration. The forestryforum.com seems to be really well done and busy, so i plan on asking a few questions there in the future.
RD
I went over there and they have a forum that guests can type in on. Their moderator sent me an em and is seting me up with registration. The forestryforum.com seems to be really well done and busy, so i plan on asking a few questions there in the future.
RD
jpm
Platinum Member
MotorSeven have you really looked into the diff between a chain mill and a band ?I went chain at first then bit the checkbook and now have a band
j
j
MotorSeven
Elite Member
J,
One reason is the $, the other is that i am more comfortable around a chainsaw, and i can de-tach it to cut down the "big one". The E.R.C. that i am going to be turning into 6" D shaped logs seems to be a pretty soft wood. I plan on ringing the trees and letting them stand dead for 4-6 months before skidding them down to the mill. I know this mill is slower, but i will be retired and time really isn't a huge issue.
I do reserve the right to slap myself in the noggin for not going with a band from the get go /forums/images/graemlins/tongue.gif! I did get a good deal (half price) on a slightly used mill on Ebay, so if i have to trade up it shouldn't sting too bad.
Feel free to give any advise/opinions..........this my first attempt at "milling", so i have alot to learn.
RD
One reason is the $, the other is that i am more comfortable around a chainsaw, and i can de-tach it to cut down the "big one". The E.R.C. that i am going to be turning into 6" D shaped logs seems to be a pretty soft wood. I plan on ringing the trees and letting them stand dead for 4-6 months before skidding them down to the mill. I know this mill is slower, but i will be retired and time really isn't a huge issue.
I do reserve the right to slap myself in the noggin for not going with a band from the get go /forums/images/graemlins/tongue.gif! I did get a good deal (half price) on a slightly used mill on Ebay, so if i have to trade up it shouldn't sting too bad.
Feel free to give any advise/opinions..........this my first attempt at "milling", so i have alot to learn.
RD
Paddy
Veteran Member
Don't dry your logs. Infact mills keep them wet with sprayers. I built a band saw from an 8 hp brigs and some junk yard scrap. It was gravity feed. The log was stationary, cutter rolled on angle iron.
Worked like a charm and built a 2400 sqft timberframe house.
Worked like a charm and built a 2400 sqft timberframe house.
