SCUT - Blue, Orange, or Green?

[TacoT96]

1* - 2* 900 hours in 3 years on my BX23 And never an uncomfortable moment in the seat.

I've only done a 5 hour stint on the BX seat, and a measly fraction of an hour on the Kioti, JD, and NH.

The BX was not uncomfortable, just not great... I could easily live with it... I'm glad to hear that some are satisfied.

 

[TacoT96]

You might want to PM Northland. He imported a B7800 from Michigan for a lot of savings....

I'll check this out when I have a little more time...

BTW does anyone know if the BX2350 is made in USA?

 

[rpoage]

I looked at and purchased a BX2350 last month. There are two possible seats on a BX tractor depending on the production date of the tractor or whether the dealer did the upgrade from Kubota. The uncomfortable one slants forward and you feel like you're going to fall out of it the newer one sits level and I think it is very comfortable. The extra leg room on the BX helped me make my decision, along with outstanding local dealer reputation.

 

[AndyMA]

BTW does anyone know if the BX2350 is made in USA?

I don't believe any of the SCUT or CUT's are made in the US.

Andy

 

[Tractor Nut]

While I cannot remember where I saw it many of the SCUTs are assembled in Georgia, this included the JD 2350 and The Kubota BX series as well as some of their lawn tractors.

I also live on the north side of the Canada/US border and am at the point where the price difference will justify gambling with the warranty on a BX24. If the difference would be within $1,000 I (just like Mac) a local Kubota dealer would get my business.

 

[LBrown59]

4 foot seems like a lot of offset. Is the offset adjustable? doesn't the tractor dogtrack with this much offset?

13000... and cheaper than the BX or some other model? The 2305 I got some pricing on was around 15% more than the BX2350. Which options & attachments were included in the dealer purchase?

I expect I'll be like most everyone else, wondering how I got along without it and why I didn't purchase sooner.

I think it's 4 inches.
He probably made a typo.

 

[LBrown59]

I looked at and purchased a BX2350 last month. There are two possible seats on a BX tractor depending on the production date of the tractor or whether the dealer did the upgrade from Kubota. The uncomfortable one slants forward and you feel like you're going to fall out of it.
The newer one sits level and I think it is very comfortable. The extra leg room on the BX helped me make my decision, along with outstanding local dealer reputation.

Congrats.
I'm thing about getting a BX1500 or 2.
Need something a little smaller to work in with my BX23.

 

[jcmseven]

Both the JD 2305 and the Kubota BX machines are assembled in Georgia.

John M

 

[briwhit]

4 foot seems like a lot of offset. Is the offset adjustable? doesn't the tractor dogtrack with this much offset?

13000... and cheaper than the BX or some other model? The 2305 I got some pricing on was around 15% more than the BX2350. Which options & attachments were included in the dealer purchase?

I expect I'll be like most everyone else, wondering how I got along without it and why I didn't purchase sooner.

It is not alot of offset and with the King kutter II it is not ajustable. I just tilled about 1 ac with it and it drove nice and straight. The right side is offset and will cover you tracks and almost the left side. It may not be 4' offset but that is what I was told and do not have it on at this time to messure it. I found the right offset is nice since it is easier to turn to my right on my tractor.

I got the 2305 with 62" deck and 200cx for 13000 and I finaced 10000 with no upcharge like the other dealer. It was 700 less then the BX2350 which almost bought my tiller from tractor supply.

 

[lawn_king]

For what its worth in MHO, go back to the drawing board and look at cuts, even the smallest cut in blue,green,orange,yellow & red is so much more tractor than the scut lines, for really not that much more $. Good luck!