Illini22
Gold Member
- Joined
- Aug 14, 2007
- Messages
- 472
- Location
- Northern Illinois
- Tractor
- 2013 Kioti dk40 hst, wright stander zero turn
Nmnmnm
Last edited:
Smart Meters
- Thread starter KTurner
- Start date
- Views: 14822
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,671
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Out West... a lot of power comes from Hydro and the utilities efficiently manage this by throttling back production or even pumping water back into the dam at slack periods.
For decades PG&E said they needed more dams to handle peek loads which are most often on the hottest days... and now, solar is doing just that... it peaks exactly when A/C use is highest.
There are 4 installs on my street... one 100% private and the other 3 are a type of lease.
The one with the biggest array also had a sophisticated grow operation that no one knew about until he went into foreclosure and had a weekend yard sale.
For decades PG&E said they needed more dams to handle peek loads which are most often on the hottest days... and now, solar is doing just that... it peaks exactly when A/C use is highest.
There are 4 installs on my street... one 100% private and the other 3 are a type of lease.
The one with the biggest array also had a sophisticated grow operation that no one knew about until he went into foreclosure and had a weekend yard sale.
Danno1
Veteran Member
No, I did not notice any difference in the monthly bill. Of course I'm not welding at 225A either!!!
I did put a clamp on amp meter on one of the power lines while welding at ~90-100A and the draw wasn't very much. I can't really remember the number though.
.
Danno1
Veteran Member
No, I did not notice any difference.Of course I'm not weldeing at 225A either!!!
I did put a clamp on anp meter on one of the power lines while welding at ~90-100A and the draw wasn't very much. I can't really remember the nuber though.
.
buckeyefarmer
Epic Contributor
around here smart meters are for time of day billing, and automated meter reading. There has been lots of resistance, my utility has not implemented yet. I did get an energy comparison today in the mail from my electric company, explaining that I use x% less than my neighbors (100 people near me), but I use y% more than my efficient neighbors (lowest 25% of my 100 neighbors. This was all to tell me how I should be conserving energy. The problem with this is: My last bill was an estimate, so the results are totally meaningless, and it only looks at KWH, with no reference to house size, number of people in the house, etc.. I was pissed they wasted so much money sending out worthless information, or still worse, that they might have got a gov't grant of some sort to put out this worthless information.
Redneck in training
Elite Member
We got new smart meter about a month ago. I asked the guy from the utility what is the motivation behind that. He said that DOE is collecting data about energy usage patterns for some research and gave them a subsidy to install the meters. The old smart meters used to send the usage every 28 days. The new smart meters can send it every few minutes if programmed that way. The meter sends the data over power line. When fully implemented we would be able to see our power usage in real time on internet. They might also sell displays that you can place in your home showing power usage, instantaneous power, rate etc.
Our daughter lives in Europe. They have tiered electric rate. All larger appliances such as washing machine, dryer, dishwasher etc have programmable timer to start working when the rate is low (in ex. at night).
Our daughter lives in Europe. They have tiered electric rate. All larger appliances such as washing machine, dryer, dishwasher etc have programmable timer to start working when the rate is low (in ex. at night).
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,671
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Lots of people had two meters over there... one was night electricity and the other daytime... the water heaters and things were on the night meter which was significantly less.
chopped
Veteran Member
BINGO BINGO
Yep I know in the future (near) that they will start to control the usage at certain times.I dont see how they could shut off individual appliances. but can see where they could say that the rate is higher for xxx time to xxx time and then know if you used it during that time. And bill accordingly.
Pirate
Gold Member
You don't see it now but in the future, major appliances will have modules in them so they can communicate/be controlled by smart meters.
chopped
Veteran Member
Well yesterday we had a huge pine tree take down the wires, sparks and flames,road blocked. Called thw power company and they said I had power. LOL So much for the smart meter lol
