Sorta embarrassed to ask ... I should really know.

   / Sorta embarrassed to ask ... I should really know. #21  
Easiest way. Forget the rope. Run a light chain from drawbar to pin in top link connector on tractor. Drive a round punch into the last link of chain to expand it to be more circular to fit the pin in the top link. Attach chain to middle of drawbar with a shackle or a quick link.
 
   / Sorta embarrassed to ask ... I should really know.
  • Thread Starter
#23  
Been a few months but I finally remembered to get a photo of the solution I ended with.
3 pt (3).JPG
 
   / Sorta embarrassed to ask ... I should really know. #24  
I had a small JD tractor with a MMM with the same issue. The dealer sold me a kit to lock the hitch arms in place. I bet that NH has something similar.
 
   / Sorta embarrassed to ask ... I should really know. #25  

Would closing that valve also prohibit the mower mid deck arms from lowering ?​

If like my 2400H Branson yes it would. If you restrict the arms from lowering the mid mount deck will not lower. Normally you don’t need to lower 3 point fully to mow so arms are not dragging on the ground.
 

Tractor & Equipment Auctions

2014 Ford Taurus AWD Sedan (A55853)
2014 Ford Taurus...
CATERPILLAR 631G MOTOR SCRAPER (A52706)
CATERPILLAR 631G...
2011 DOOSAN G25KW GENERATOR (A53843)
2011 DOOSAN G25KW...
WHIRLPOOL WASHER & KENMORE ELITE DRYER (A54757)
WHIRLPOOL WASHER &...
2015V Chevrolet Equinox SUV (A53424)
2015V Chevrolet...
2012 Club Car Precedent Electric Golf Cart (A53424)
2012 Club Car...
 
Top