Sorta embarrassed to ask ... I should really know.

   / Sorta embarrassed to ask ... I should really know. #21  
Easiest way. Forget the rope. Run a light chain from drawbar to pin in top link connector on tractor. Drive a round punch into the last link of chain to expand it to be more circular to fit the pin in the top link. Attach chain to middle of drawbar with a shackle or a quick link.
 
   / Sorta embarrassed to ask ... I should really know.
  • Thread Starter
#23  
Been a few months but I finally remembered to get a photo of the solution I ended with.
3 pt (3).JPG
 
   / Sorta embarrassed to ask ... I should really know. #24  
I had a small JD tractor with a MMM with the same issue. The dealer sold me a kit to lock the hitch arms in place. I bet that NH has something similar.
 
   / Sorta embarrassed to ask ... I should really know. #25  

Would closing that valve also prohibit the mower mid deck arms from lowering ?​

If like my 2400H Branson yes it would. If you restrict the arms from lowering the mid mount deck will not lower. Normally you don’t need to lower 3 point fully to mow so arms are not dragging on the ground.
 

Tractor & Equipment Auctions

2018 Polaris Ranger XP General, VIN # 3NSRHK995JH466185 (A54865)
2018 Polaris...
2020 Nissan Rogue SUV (A55853)
2020 Nissan Rogue...
Toro Cart Run and Drive (A50324)
Toro Cart Run and...
2019 Ford F-350 4x4 Crew Cab Auto Crane EHC-4 4,000lb 2 Ton Mechanics Crane Service Truck (A53422)
2019 Ford F-350...
New/Unused Easy Clean Hot Water Pressure Washer (A54865)
New/Unused Easy...
CATERPILLAR 21" PIN ON BUCKET (A52706)
CATERPILLAR 21"...
 
Top