Sorta embarrassed to ask ... I should really know.

   / Sorta embarrassed to ask ... I should really know. #21  
Easiest way. Forget the rope. Run a light chain from drawbar to pin in top link connector on tractor. Drive a round punch into the last link of chain to expand it to be more circular to fit the pin in the top link. Attach chain to middle of drawbar with a shackle or a quick link.
 
   / Sorta embarrassed to ask ... I should really know.
  • Thread Starter
#23  
Been a few months but I finally remembered to get a photo of the solution I ended with.
3 pt (3).JPG
 
   / Sorta embarrassed to ask ... I should really know. #24  
I had a small JD tractor with a MMM with the same issue. The dealer sold me a kit to lock the hitch arms in place. I bet that NH has something similar.
 
   / Sorta embarrassed to ask ... I should really know. #25  

Would closing that valve also prohibit the mower mid deck arms from lowering ?​

If like my 2400H Branson yes it would. If you restrict the arms from lowering the mid mount deck will not lower. Normally you don’t need to lower 3 point fully to mow so arms are not dragging on the ground.
 

Tractor & Equipment Auctions

20702 (A51694)
20702 (A51694)
New/Unused Wolverine Skidsteer Trencher (A54865)
New/Unused...
2018 Kubota RTV-X900 4x4 Diesel Utility Cart (A55851)
2018 Kubota...
2011 CATERPILLAR D7E HI-TRACK CRAWLER DOZER (A52707)
2011 CATERPILLAR...
Chery 7' 35 Drawer Workbench (A50120)
Chery 7' 35 Drawer...
Homemade Flatbed Tilt Trailer (A50322)
Homemade Flatbed...
 
Top