Starlink

   / Starlink #1,552  
What is the ethernet connection used for and is it necessary?

You can either hook up one client device for its network connection or you can use it to feed the WAN (input) side of a different wifi router or mesh system. The wifi router included with the dish is decent but some folks have other needs.
 
   / Starlink #1,554  
Stop giving it a nickname. Problem solved. It's the dish.
 
   / Starlink #1,555  
Thanks for the info about the ethernet connection. Doesn't sound like I will need one.
 
   / Starlink #1,556  
Is anyone using the new Gen 2 dish yet and if so, what is the router range?

I want to mount it on my garage roof about 60' away from the house.
 
   / Starlink #1,557  
Is anyone using the new Gen 2 dish yet and if so, what is the router range?

I want to mount it on my garage roof about 60' away from the house.

if u want any real speed, your going to have to go wired or directional antenna. especially going through a house.
 
   / Starlink #1,558  
if u want any real speed, your going to have to go wired or directional antenna. especially going through a house.
I'll 2nd that. For moderate obstructions like a few walls or a few hundred feet a properly aimed directional antenna on 1 side will get the job done. With lots of distance you need high gain directional antennas on both ends. That won't get through thick obstructions though.

With a high gain directional antenna on you can hit in-flight wifi if you are near an airport. Not reliable at all & good luck tracking the plane for any length of time. That's at least 5,000'.
 
   / Starlink #1,559  
I'll 2nd that. For moderate obstructions like a few walls or a few hundred feet a properly aimed directional antenna on 1 side will get the job done. With lots of distance you need high gain directional antennas on both ends. That won't get through thick obstructions though.

With a high gain directional antenna on you can hit in-flight wifi if you are near an airport. Not reliable at all & good luck tracking the plane for any length of time. That's at least 5,000'.
Can you post a link to this high gain equipment and how would it connect it to the Gen 2 Starlink router?
 
   / Starlink #1,560  
Can you post a link to this high gain equipment and how would it connect it to the Gen 2 Starlink router?
is it line of sight?


you treat it like a long ethernet wire. you will need another Wifi AP in the house. and the ethernet addon if its gen2 for the starlink
 
Last edited:

Tractor & Equipment Auctions

LOT OF 12' FLAT IRON (A58374)
LOT OF 12' FLAT...
Paladin 24in Quick Hitch Digging Tooth Bucket Excavator Attachment (A55973)
Paladin 24in Quick...
2014 Ford F-150 Pickup Truck, VIN # 1FTFX1EF7EKF89312 (A57453)
2014 Ford F-150...
Weld on excavator thumb EK1212 (A56435)
Weld on excavator...
1994 John Deere 544G Wheel Loader (A55272)
1994 John Deere...
2012 Kenworth T800 T/A Wet Kit Sleeper Cab Truck Tractor (A55973)
2012 Kenworth T800...
 
Top