STARTING KEY JD2010

[bo50]

Hello forum. Just after buying my 'new' JD 2010 (19630 I had the bad luck to break the key! So I went to the fence cut of a piece of wire, bent it and pushed it in the slot of the tractor. And it started. Now after a couple of weeks doing just the same thing with the wire (now my key) I get starting problems. Battery gets flat, I don't know if the glow plug works and it is difficult to start even when its warm, after a couple of hours running. So I think the key does more then just the wire and I think I am in need of a new real key. Anyone where I can get that? Living in Western Australia - Porongurup Area. Thanks guys.

 

[nextofkin]

bo50
You might have to go to a John Deer dealer for a key, I have a Massey Ferguson 1428V and thats what I had to do, no key shop could make a key it was a special key blank.
nextofkin

 

[breadtrk]

The wire is probably not getting it all the way to the OFF position. It is stuck in Accessory and that is what is draining the battery.

 

[almaryholm]

I used a 5065M at work and carried a spare key on my key ring and could use it to start ANY JD I came across....

 

[Tx Jim]

JD PN A4700R Key - ADD 2.30 USD

 

[bo50]

Yes the JD dealer in Albany wants just to sell and advised me to buy a new JD lock: 300 bucks!

 

[bo50]

Hi Tx Jim. Can I order a key from you? Is that what your message means?

 

[Tx Jim]

Hi Tx Jim. Can I order a key from you? Is that what your message means?

Not exactly. A4700R is the part number for the key that any reputable/competent JD dealer should be able to get for you.

 

[bo50]

Thanx Gonna give that number a try, see how they react at the JD shop.

 

[bo50]

Thanx a bunch Tx Jim. It Worked! Today I received my keys in Albany Australia! $7.88!!! while they were trying to sell met a whole new lock etc for 300 bucks. Gonna try them tomorrow but I'm sure they'll work. Thanks forum. Great you helped me out!