OP
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Tatro / WR Long grapple combo install
- Thread starter MadReferee
- Start date
- Views: 12425
More options
Who Replied?ksmmoto
Gold Member
I just bought some nylon sleeving from McMaster-Carr at:
http://www.mcmaster.com/
It is on catalog page 733 at the bottom and is called "Woven Nylon Fabric Sleeving". Price was very reasonable in my opinon.
ksmmoto
http://www.mcmaster.com/
It is on catalog page 733 at the bottom and is called "Woven Nylon Fabric Sleeving". Price was very reasonable in my opinon.
ksmmoto
ksmmoto
Gold Member
I just bought some nylon sleeving from McMaster-Carr at:
http://www.mcmaster.com/
It is on catalog page 733 at the bottom and is called "Woven Nylon Fabric Sleeving". Price was very reasonable in my opinon.
ksmmoto
http://www.mcmaster.com/
It is on catalog page 733 at the bottom and is called "Woven Nylon Fabric Sleeving". Price was very reasonable in my opinon.
ksmmoto
ksmmoto
Gold Member
Great job on the install, Mad. You beat me to it, I just received my W.R. Long valve from Carver Equipment last week.
I have a Pirraha Root Grapple that I bought a year ago and just am getting around to install. Kind of slow I know, but the grapples have went up alot in price due to steel and the huricane cleanups. So I came out ok.
Anyway, after the 20th when my daughter has her high school open house, I will have time to install the valve and grapple. I plan to post all like you did here.
ksmmoto
I have a Pirraha Root Grapple that I bought a year ago and just am getting around to install. Kind of slow I know, but the grapples have went up alot in price due to steel and the huricane cleanups. So I came out ok.
Anyway, after the 20th when my daughter has her high school open house, I will have time to install the valve and grapple. I plan to post all like you did here.
ksmmoto
ksmmoto
Gold Member
Great job on the install, Mad. You beat me to it, I just received my W.R. Long valve from Carver Equipment last week.
I have a Pirraha Root Grapple that I bought a year ago and just am getting around to install. Kind of slow I know, but the grapples have went up alot in price due to steel and the huricane cleanups. So I came out ok.
Anyway, after the 20th when my daughter has her high school open house, I will have time to install the valve and grapple. I plan to post all like you did here.
ksmmoto
I have a Pirraha Root Grapple that I bought a year ago and just am getting around to install. Kind of slow I know, but the grapples have went up alot in price due to steel and the huricane cleanups. So I came out ok.
Anyway, after the 20th when my daughter has her high school open house, I will have time to install the valve and grapple. I plan to post all like you did here.
ksmmoto
Moemoe
Silver Member
Mad, I was wondering where you got the fittings (and what are they called) that go thru the angle bracket to connect the hoses and also the QCs. Nice job. I've got all my stuff ready to put my grapple on except the above mentioned fitting and some time. Thanks.
Moemoe
Silver Member
Mad, I was wondering where you got the fittings (and what are they called) that go thru the angle bracket to connect the hoses and also the QCs. Nice job. I've got all my stuff ready to put my grapple on except the above mentioned fitting and some time. Thanks.
OP
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
They are standard bulkhead fittings. These are 1/4" NPT male to 3/8 JIC male (designation 04-06). Pretty standard stuff. I got them from Discount Hydraulic Hose.
