TODAYS SEAT TIME

   / TODAYS SEAT TIME #13,111  
Cut this lot of mine. Fully intended to keep it sprayed and clipped to eventually get a few bales from it this year
Maybe next year.


IMG_5455.JPG


IMG_5454.JPG
 
   / TODAYS SEAT TIME #13,113  
Moving dirt with the 72 inch wide one cubic yard bucket to build up a low area:
P9230002.JPG
P9230004.JPG


First pass using the bucket to level the high spots:
P9230006.JPG


Drove over the area "Wheel Packing" the dirt:
P9230008.JPG
 
   / TODAYS SEAT TIME #13,114  
Guy a few miles up the road from me runs a tractor repair shop out of his barn. He's had a Toro Groundsmaster with a cab sitting there for about a week now. Thought of you when I saw it, Dennis. I don't see too many of them around.
 
   / TODAYS SEAT TIME #13,115  
Guy a few miles up the road from me runs a tractor repair shop out of his barn. He's had a Toro Groundsmaster with a cab sitting there for about a week now. Thought of you when I saw it, Dennis. I don't see too many of them around.
Yep, there are times I wish mine had a cab.
Putting the canopy on made usable on sunny days:

P4070001.JPG
 
   / TODAYS SEAT TIME #13,116  
I had to rent a pocket sizes mini excavator today for a job. I don’t think I’ll be trading my bigger excavators in anytime soon.
IMG_2974.JPG
IMG_2975.JPG
 
   / TODAYS SEAT TIME #13,117  
A bundle of plywood appears to be over the limits of my wheeled skid steer. My same size machine with tracks will lift it.
IMG_3117.JPG
 
   / TODAYS SEAT TIME #13,118  
I used my skid steer mixer today. It’s kinda expensive for something that doesn’t get used much but it’s a huge back saver. This wall was about 5 ft high and I was able to dump it right in the top. Shoveling 84 bags that high would have really sucked.
IMG_3147.JPG
IMG_3148.JPG
IMG_3149.JPG
 
   / TODAYS SEAT TIME #13,119  
NIce ! Get a couple of guys to hang off the back and the machine will lift the plywood a little... maybe enough to drive around some.
 
   / TODAYS SEAT TIME #13,120  
NIce ! Get a couple of guys to hang off the back and the machine will lift the plywood a little... maybe enough to drive around some.

I’ve already got optional counter weights on it. Idk that the hydraulics are good for much more even if I had more counter weight. A different distributor makes 68 sheet bundles that I feel like it would lift. Those are 80 sheet bundles.
 
Last edited:

Tractor & Equipment Auctions

WOLVERINE TQH-26-02C 3PT TRAILER MOVER (A52708)
WOLVERINE...
2005 Ford F-350 Reading Service Truck (A56858)
2005 Ford F-350...
2017 Chevrolet Tahoe SUV (A56859)
2017 Chevrolet...
2015 TROXEL 150 BBL ALUMINUM VACUUM TRAILER (A58214)
2015 TROXEL 150...
24220 (A56859)
24220 (A56859)
5TH WHEEL SLEEVE FOR GOOSENECK TRAILER (A58374)
5TH WHEEL SLEEVE...
 
Top