Tool Box Mounting options on a Kioti

[Threepoint]

We make one that will fit your ROPS. Can install in almost any direction, even make 2 different versions so you can mount one on both sides and be symmetrical if you want or choose the one that fits your needs best. Take a look: BXpanded ROPS Mounted Tool Box.

Nice looking accessory.

 

[dragoneggs]

Here is what I just did with a small ammo can to hold my chain...

http://www.tractorbynet.com/forums/build-yourself/369233-bx-auxiliary-chain-box-mod.html?highlight=

 

[SCWOOD]

Iput a angle iron across ROPS set bolt ammo box to it and Bracket for sign.

 

[dragoneggs]

View attachment 479888 Iput a angle iron across ROPS set bolt ammo box to it and Bracket for sign.

That location works great unless you have a BH. Here are a couple pics of mine mounted on the FEL tower.

 

[Buggs67]

I removed the Slow Vehicle sign and used those brackets to mount a small ammo box. Just enough for a couple wrenches and pins and gloves.

SCWOOD's solution is also a good one. I was going to mount a larger box to the ROPS using U bolts and spacers but I instead used this location for a chainsaw mount.

 

[Ranchofla]

That location works great unless you have a BH. Here are a couple pics of mine mounted on the FEL tower.

View attachment 479889 View attachment 479890

So how did you actually mount the box to the tower are the gray objects in the picture spacers??

Thanks

Rancho

 

[IslandTractor]

On my DK40, I took off the factory toolbox which is more appropriate for holding your lunch than tools and parts. I fabricated a larger version with 12g which was easy as I was taking a welding course and had access to a high school metal shop. Later I found that AgriSupply sells a nearly identical sized toolbox in 16 or 18 gauge (which is adequate). If you drill a couple of holes in the bottom those factory made toolboxes will bolt right on in place of the miniature factory version.

 

[murphy1244]

Got mine from HD.

 

[dragoneggs]

So how did you actually mount the box to the tower are the gray objects in the picture spacers??

Thanks

Rancho

Hi Rancho, not trying to hijack this thread but if you check out my post #12 here I give you a link to how I did it. I used Click Bond adhesive bonded fasteners. I mounted my LED lights and side view mirrors with them too. No holes, no welding.

 

[dragoneggs]

Got mine from HD.

That is a nice big box Murph! I wish I had that kind of space on my little BX.