dirt clod
Gold Member
- Joined
- Jul 21, 2006
- Messages
- 331
- Location
- panama city and altha florida
- Tractor
- Kubota L3300, m5700, case 580se
top link
- Thread starter dirt clod
- Start date
- Views: 5426
JerryG
Super Member
If your going to pay that much for one, get it from Carter and Carter for about the same money. It will be a Cat. 1 (right length and ball ID) like you need instead of Cat. 2. The C&C cylinder also has valves on board to keep it from drifting down.
OP
dirt clod
Gold Member
- Joined
- Jul 21, 2006
- Messages
- 331
- Location
- panama city and altha florida
- Tractor
- Kubota L3300, m5700, case 580se
Your right that is a good deal. Looks like they offer several differant lengths.
What would be the best size for my L3300? I have landscape rake, moldboard plow, disc harrow, box blade, subsoiler, bush hog, tiller.
What would be the best size for my L3300? I have landscape rake, moldboard plow, disc harrow, box blade, subsoiler, bush hog, tiller.
If you look on their website and open the pdf called:
Top-N-Tilt: Information needed to install
INSTALLATION QUESTIONS PDF
it should answer most of your questions. If you still have some, call them and they will happily help you out. I'm very happy with their top and side link cylinders and their service.
Top-N-Tilt: Information needed to install
INSTALLATION QUESTIONS PDF
it should answer most of your questions. If you still have some, call them and they will happily help you out. I'm very happy with their top and side link cylinders and their service.
JerryG
Super Member
Your tractor uses a Cat. 1 size link. The one that you more than likely will need will be the 18-26.5". Unless you have a Pat's quick change, then you might need the 21-32". I know I had to go to the longer size when I put Pats on. Measure your top link with it at it's shortest length and then fully extended. Compare that to the available link sizes.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Nuthin' but good advice here. I can only 2nd the motion (3rd the motion?) of getting your HTL from CCM.
hammer1995
Bronze Member
Ditto the above about Carter and Carter. I just bought one from them for my L3130. $255 delivered with the hoses and quick connects.
jgrreed
Platinum Member
Hi Guys,
Quick Q. I'm looking at a hydro top link from CCM as I'm very impressed by all you've had to say about them.
I run a Speeco quick hitch on my JD 4720 and was wondering if that changed the length of TL I should order?? I noticed that the Pat's Quickie unit changed the required length.
Thanks for your help.
-Jer.
Quick Q. I'm looking at a hydro top link from CCM as I'm very impressed by all you've had to say about them.
I run a Speeco quick hitch on my JD 4720 and was wondering if that changed the length of TL I should order?? I noticed that the Pat's Quickie unit changed the required length.
Thanks for your help.
-Jer.
kennyd
Advertiser
You won't need a longer TL with that style QH...Only the Pat's style need the TL longer.
jgrreed
Platinum Member
Thanks Kenny.
What is it about the Pat's that requires a longer TL???
-Jer.
What is it about the Pat's that requires a longer TL???
-Jer.
