Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,295
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Top link
- Thread starter coupman35
- Start date
- Views: 7995
OP
coupman35
Gold Member
How much longer did that extender give you . The dealer said the other top link they can get it 24 to 32 inch that dont sound ok
oosik
Epic Contributor
The hydraulic top link I got from Brian( Fit Rite Hydraulics ) extends a couple inches more than the OEM that came with my tractor. It's been a real life saver. It allows me to "fine tune" implements to their max.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,295
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
You can make it as long as it needs to be.
OP
coupman35
Gold Member
Yep your right am going to do it today .I guess if i do it to get 3 to 4 in extra that be ok
Snowlan
Silver Member
Category 1 Hydraulic Top Link 20 7/8" - 31 7/8"
Our Category 1 Hydraulic Top Link with double-piloted check valve prevents cylinder drift and holds cylinder in position. This feature makes our hydraulic top link the best in the market! Cylinder Features: Part Number 06004*Now available in green! Part number Y503028BM* Category: 1 Pin hole...
www.agristoreusa.com
20 7/8" - 31 7/8" with free shipping. $224.99
The one the dealer is offering will limit adjustment on the short end, as will an extender.
OP
coupman35
Gold Member
Yep but 224.99 that in USA fun and free shipping in the USA .
Snowlan
Silver Member
Yes, sorry you are correct. I'm ordering from these guys as soon as I get my tractor next week and confirm the short and long adjustment length on my top link. I like that they include the check valve so the cylinder doesn't creep down.
OP
coupman35
Gold Member
Leejohn
Elite Member
I use this cyl. 2x16x1.5 DA Hydraulic Cylinder Wolverine WWSB2016-S | Double Acting Hydraulic Cylinders | Hydraulic Cylinders | Hydraulics | www.surpluscenter.com.
It's on a kubota L4240 with cat 2 to cat 1 bushing. It has about 1/8" between the mounting bracket and the base end of the cyl. I think I had to grind a little on the balls and I tack welded the bushings in, The cyl does not leak down, but rear remote valve bleeds down real slow,
It's on a kubota L4240 with cat 2 to cat 1 bushing. It has about 1/8" between the mounting bracket and the base end of the cyl. I think I had to grind a little on the balls and I tack welded the bushings in, The cyl does not leak down, but rear remote valve bleeds down real slow,
